Abstract:In-situ irradiations using 1 MeV Kr2+ ions in a transmission electron microscope were performed on extraction replica samples containing M23C6 carbides and MX carbonitrides from two ferritic-martensitic (FM) steels: (i) 9%Cr-1%W-TaV based Eurofer97 and (ii) 9%Cr-1%Mo-VNb (all in wt.%) based additively manufactured (AM) Grade91 steel. The irradiations were performed between 100 – 773 K up to a maximum dose of ∼2.4 displacements per atom (dpa). The M23C6 carbides are highly susceptible to radiation induced amorphization (RIA), while the MX type nanoprecipitates are highly amorphization resistant across the entire irradiation temperature range. Between 100 – 423 K, RIA of M23C6 carbides occurs very rapidly with critical amorphization doses ranging between ∼0.35 – 0.9 dpa, increasing to higher doses at 573 K. Complete amorphization of the M23C6 carbides up to doses of ∼2.4 dpa is not possible at 773 K under the present irradiation conditions. The critical amorphization dose of M23C6 carbides increases nearly exponentially with irradiation temperature. The critical temperature for the crystalline-to-amorphous phase transformation (Tc→a) of M23C6 carbides irradiated as replica samples, i.e. without the surrounding metal matrix, was estimated to be ∼812 K. Comparing the present results with neutron irradiation data on bulk samples reveals a decrease in the critical amorphization dose for M23C6 and an increase of Tc→a, highlighting the effect of dose rate on the amorphization behavior that is qualitatively consistent with literature on other non-metals. Changes in the minor chemistry of M23C6, such as presence or absence of W, V, Nb, Mo, seems to have little effect on the amorphization behavior. In-situ irradiations on extraction replica samples provide a novel pathway to explore radiation tolerance of nanoprecipitates in nuclear structural materials without interference from the matrix.

In-situ Electrothermal Fluorination-Assisted Matrix Removal, Slurry Sampling, Graphite Furnace Atomic Absorption Spectrometry for the Determination of Trace-Level Chromium, Cobalt and Vanadium in Zirconium Dioxide Powder

A direct solid sampling electrothermal atomic absorption spectrometric method for determination of trace elements in zirconium dioxide

Direct analysis of titanium dioxide solid powder by fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

Sol-gel zirconia coating capillary microextraction on-line hyphenated with inductively coupled plasma mass spectrometry for the determination of Cr, Cu, Cd and Pb in biological samples

Zirconium sponge production: an integrated approach for chemical characterization of process intermediates using ICP-OES

Matrix Interference Study: Determination of Halogens in Standard Steel Residues and Zinc Sulfide Concentrates by Ion Chromatography

Radiation induced amorphization of carbides in additively manufactured and conventional ferritic-martensitic steels: In-situ experiments on extraction replicas

Determination of niobium, tantalum, zirconium and hafnium in geological materials by extraction chromatography and inductively coupled plasma mass spectrometry

Determination of Trace Thorium and Uranium Impurities in Scandium with High Matrix by ICP-OES

Direct Determination of Trace Metals in Boron Carbide by Slurry Introduction Axial Viewed Inductively Coupled Plasma Optical Emission Spectrometry

Analysis of High-Purity Germanium Dioxide by Inductively Coupled Plasma Atomic Emission Spectrometry with Reaction Distillation of the Matrix

A MWCNTs@CuAl2O4@SiO2 Nanocomposite for the Speciation of Cr(III), Cr(VI), and Total Chromium Prior to High-Resolution Continuum Source Flame Atomic Absorption Spectrometric Determination

Study on Zinc-Modified Adsorbent for Adsorption of Trace CO2 in Electronic Special Gas BF3

Effects of Co-Existing Ions and Natural Organic Matter on Removal of Chromium (vi) from Aqueous Solution by Nanoscale Zero Valent Iron (Nzvi)-Fe3o4 Nanocomposites

Development of analytical method for zirconium determination in U–Pu–Zr alloy samples

Determination of Trace and Ultra-Trace Amounts of Germanium in Environmental Samples by Preconcentration in a Graphite Furnace Using a Flow Injection Hydride Generation Technique

Removal of V(V) from a Mixed Solution Containing Vanadium and Chromium Using a Micropocrous Resin in a Column: Migration Regularity of the Mass Transfer Zone and Analysis of Dynamic Properties

Coupling of an electrodialyzer with inductively coupled plasma mass spectrometry for the on-line determination of trace impurities in silicon wafers after surface metal extraction

Determination of trace phosphorus in zirconium-niobium alloy and Zircaloy by UV-vis spectrophotometry