Abstract:Boron, as both a lithophilic and biophilic element with high solubility, provides profound insights into the history of the Earth and environmental changes through its isotopes present in sediments. However, there are still some challenges in the accurate and precise determination of boron isotopes in sediments, particularly in pre-processing. When using boron-specific resins for the purification and enrichment of boron, it is in an alkaline environment. During the pre-treatment process, insoluble hydroxides of Al, Fe, and rare earth elements precipitate, exhibiting strong boron adsorption in high-pH solutions. This has potential impacts on the accuracy of boron isotope measurements. This study assesses a method that uses Na 2 CO 3 and K 2 CO 3 for dissolution at reduced temperatures and a cationic resin combined with a boron-specific resin for the enrichment and purification of boron in sediments. All the Al, Fe, and rare earth elements, which can generate water-insoluble hydroxides, were mainly removed by the cationic resin column, and boron in the sample solutions without Al, Fe, and rare earth elements was extracted by the boron-specific resin. The boron isotope composition ( δ 11 B) was determined using MC-ICP-MS. The results indicate that this method fully decomposes and efficiently purifies the sediments. The long-term instrumental external reproducibility of δ 11 B values for NIST SRM 951a, ERM-AE120, and ERM-AE121 were 0.01 ± 0.09‰ ( n = 13), −20.28 ± 0.16‰ and 19.98 ± 0.14‰, based on the measurements using a series of international reference materials over the last three years. The measured δ 11 B values for the standards have various matrices. The δ 11 B values of GSR-1 (−13.14‰ ± 0.27‰), BHVO-2 (−0.66 ± 0.06‰), AGV-2 (−3.22 ± 0.14‰) and Nass-6 (39.83 ± 0.07‰) are in agreement with the published data within uncertainty. The samples from Sihailongwan Maar Lake (SMK), the Loess Plateau (Loess-1 and Loess-2), shale (SH-1 and SH-2), and basalt (BL-1 and BL-2) were treated. The δ 11 B values for SMK, Loess-1, and Loess-2 are −10.20 ± 0.29‰, −11.06 ± 0.16‰, and −10.79 ± 0.10‰, showing a close relationship with δ 11 B of the continental crust. The δ 11 B values for shale (SH-1 and SH-2) are −7.06‰ ± 0.32‰ and +2.28‰ ± 0.05‰, while those for basalt (BL-1 and BL-2) are −8.78‰ ± 0.09‰ and +2.50‰ ± 0.19‰. These results indicate a significant variation in the δ 11 B values across these samples. These findings imply that this approach is capable of efficiently enriching and purifying boron in sediments. It enables accurate and precise determination of δ 11 B in sediments, thus offering a reliable tool for conducting boron isotope studies in sedimentary earth science.

Direct Determination of Trace Metals in Boron Carbide by Slurry Introduction Axial Viewed Inductively Coupled Plasma Optical Emission Spectrometry

Direct Determination of Impurities in High Purity Silicon Carbide by Inductively Coupled Plasma Optical Emission Spectrometry Using Slurry Nebulization Technique

A direct solid sampling electrothermal atomic absorption spectrometric method for determination of trace elements in zirconium dioxide

Direct Determination of Trace Impurities in High-Purity Silicon Nitride by Axial Viewed Inductively Coupled Plasma Optical Emission Spectrometry Using A Slurry Nebulization Technique

Preparation of A High-Concentration Nm-Size Ceramic Silicon Carbide Slurry for the Icp-Oes Determination of Ultra-Trace Impurities in A Sample

Determination of Trace Phosphorus in Cobalt-Niobium-zirconium Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry

[Direct determination of Nb in titanium oxide using slurry sample introduction by axial viewing inductively coupled plasma optical emission spectrometry]

Determination of impurities in titanium nitride by slurry introduction axial viewed inductively coupled plasma optical emission spectrometry

B4C‐Assisted Paper Spray Ionization Mass Spectrometry

Determination of metal impurities in titanium dioxide using slurry sample introduction by axial viewing inductively coupled plasma optical emission spectrometry

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Simultaneous direct determination of aluminum, calcium and iron in silicon carbide and silicon nitride powders by slurry-sampling graphite furnace AAS

Purification of boron using a combination of cationic and boron-specific resins and determination of boron isotopic composition in sediments by MC-ICP-MS

Effects of boron content on the structure and magnetic properties of Fe81-xSi13BxMo2Cr1Cu1P2 nanocrystalline alloys

Sol-gel zirconia coating capillary microextraction on-line hyphenated with inductively coupled plasma mass spectrometry for the determination of Cr, Cu, Cd and Pb in biological samples

Determination of niobium, tantalum, zirconium and hafnium in geological materials by extraction chromatography and inductively coupled plasma mass spectrometry

Characterization of stability of ceramic suspension for slurry introduction in inductively coupled plasma optical emission spectrometry and application to aluminium nitride analysis

Evaluation of analytical uncertainty in quantitative determination of elements - The case of boron

Determination of Bismuth in Sediment and Soil by Ultrasonic Slurry Sampling Electrothermal Atomic Absorption Spectrometry

Improved Alkaline Fusion Method for B Isotope and Concentration Measurements of Silicate Materials

Direct analysis of titanium dioxide solid powder by fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry