Abstract:A novel method for inductively coupled plasma atomic emission spectrometry (ICP-AES) determination of trace amounts of Pt(II), Pd(II) and Rh(III), based on gaseous compounds introduction into the plasma as their diethyldithiocarbamate complexes by electrothermal vaporization (ETV), was developed. At the temperature of 1100°C, the trace amounts of Pt, Pd and Rh were vaporized into plasma. The factors affecting the formation of the chelates and their vaporization behaviors, such as ashing temperature and time, vaporization temperature and time, pH and the concentration of chelating reagents were studied in detail. Under the optimized conditions, the limits of detection (LODs) (3σ) of Pt, Pd and Rh for tested solutions were 5.4, 1.4 and 0.8ngml−1, and for actual sample (auto-catalyst NIST SRM 2557) were 0.27, 0.07 and 0.04μgg−1, respectively. The relative standard deviations (RSDs) for Pt, Pd and Rh were 1.4, 2.6 and 2.4% (CPt=0.5μgml−1, CPd,Rh=0.25μgml−1, n=7), respectively. The linear ranges of calibration graphs for Pt, Pd and Rh cover three orders of magnitude. Compared with conventional electrothermal vaporization technique, using the reagent of diethyldithiocarbamate as chemical modifier could not only enhance the analytical sensitivities, but also reduce the vaporization temperature. By combination with a separation/preconcentration step, the proposed method had been successfully applied to the analysis of the artificial seawater, tap water and urine with recoveries ranging from 91 to 106%. The two certified reference material meager platinpalladium ore GBW 07293 and auto-catalyst NIST SRM 2557 was also analyzed for validation, and the determined values obtained were in good agreement with the certified values.

Direct Determination of Trace Elements in Micro Amounts of Biological Samples Using Electrothermal Vaporization Coupled to Icp-Aes

Fluorination Assisted Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry: An Effective Method for Direct Determination of Refractory Elements in Solid Biological Samples

Direct Determination of Trace Elements in Amber Sample by Fluorination ETV-ICP-AES

Direct determination of trace refractory elements in human serum by ETV–ICP–MS with in-situ matrix removal

Direct determination of trace elements in austenitic stainless steel samples by ETV-ICPOES

Direct ICP-AES Determination of Trace Impurities in Silicon Dioxide Using Fluorinating Electrothermal Vaporization with Slurry Sampling

Fluorination Assisted Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission-Spectrometry for A Direct Determination of Chromium in Biological-Materials

Hollow-fiber Liquid-Phase Microextraction Prior to Low-Temperature Electrothermal Vaporization ICP-MS for Trace Element Analysis in Environmental and Biological Samples.

Determination of Trace Ag, Au, Ge, Pb, Sn and Te by Microwave Plasma Torch Atomic Emission Spectrometry Coupled with an Electrothermal Vaporization Sample Introduction System.

Determination of titanium, nickel and lead by electrothermal vaporization-inductively coupled plasma atomic emission spectrometry with the use of fluorine -containing matrix modifier

Determination of Platinum, Palladium and Rhodium in Biological and Environmental Samples by Low Temperature Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry with Diethyldithiocarbamate As Chemical Modifier

Determination Of Trace Cd And Pb In Environmental And Biological Samples By Etv-Icp-Ms After Single-Drop Microextraction

Determination of Pt in biological samples by inductively coupled plasma atomic emission spectrometry (ICP-AES) with electrothermal vaporization (ETV)

Determination of Trace Amounts of Rare Earth Elements by ETV-ICP-AES Combined with Microcolumn Separation/Preconcentration

Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for the Determination of Trace Amount of Lanthanides and Yttrium in Soil with Polytetrafluroethylene Emulsion As a Chemical Modifier

Volatilization of Cr, Co, Mn and Ni as their pyrrolidinecarbodithioate chelates from electrothermal vaporizer for sample introduction in inductively coupled plasma optical emission spectrometry.

Coupling Electrophoretic Separation With Inductively Coupled Plasma Spectroscopic Detection: Interfaces And Applications From Elemental Speciation, Metal-Ligand Interaction To Indirect Determination

Direct analysis of titanium dioxide solid powder by fluorination assisted electrothermal vaporization inductively coupled plasma atomic emission spectrometry

Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry Determination of Gold, Palladium, and Platinum Using Chelating Resin YPA4 As Both Extractant and Chemical Modifier

Determination of Refractory Elements in Atmospheric Particulates Using Slurry Sampling Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry and Inductively Coupled Plasma Mass Spectrometry with Polyvinylidene Fluoride As Chemical Modifier.

Zirconia-Coated Graphite Adsorption Bar Micro-Extraction Combined with Etv-Icp-Ms for the Determination of Trace Amounts of Cd, Hg and Pb in Environmental and Biological Samples