Determination of Trace Amounts of Lead, Arsenic, Nickel and Cobalt in High-Purity Iron Oxide Pigment by Inductively Coupled Plasma Atomic Emission Spectrometry after Iron Matrix Removal with Extractant-Contained Resin.

Yuyu Xu,Hanfeng Zhou,Guoxin Wang,Jinfan Zhou,Guanhong Tao

DOI: https://doi.org/10.1016/j.aca.2006.11.014

IF: 6.911

2007-01-01

Analytica Chimica Acta

Abstract:Inductively coupled plasma atomic emission spectrometry (ICP-AES) was applied to the determination of lead, arsenic, nickel and cobalt in high-purity iron oxide pigment. Samples were dissolved with hydrochloric acid and hydrogen peroxide. The digest was passed through a column, which was packed with a polymer resin containing a neutral organophosphorus extractant, tri-n-butylphosphate. Iron was sorbed selectively on the resin and the analytes of interest passed through the column, allowing the effective separation of them from the iron matrix. Conditions of separation were optimized. The detection limits (3sigma) in solution were 10, 40, 7 and 5 microg L(-1), and in pigment were 0.2, 0.8, 0.14 and 0.1 mg kg(-1) for lead, arsenic, cobalt and nickel, respectively. The recoveries ranged from 95% to 107% when sample digests were spiked with 5 microg of the analytes of interest, and relative standard deviations (n=6) were 1.5-17.6% for the determination of the spiked samples. The method was successfully applied to the determination of trace amounts of these elements in high-purity iron oxide pigment samples.