Abstract:The analytical performances of a coupled hydride generation, integrated atom trap (HG-IAT) atomizer flame atomic absorption spectrometry (FAAS) system were evaluated for determination of Ge and Sn and inorganic tin species in environmental samples. Germanium and tin hydrides were atomized in air-acetylene flame-heated IAT. A new design of HG-IAT-FAAS hyphenated technique that would exceed the operational capabilities of existing arrangements (a water-cooled single silica tube, double-slotted quartz tube) permitting construction of an “integrated trap” was investigated. For the estimation of Sn(II) and Sn(IV) concentrations in samples, the difference between the analytical sensitivities of the absorbance singnals obtained for tin hydride without and with previous treatment of samples with L-cysteine could be used. The concentration of Sn(IV) was calculated by the difference between total Sn(tot) and Sn(II). An improvement in limit of detection was achieved compared with that obtained using any of the aforementioned atom trapping techniques separately. The concentration limits of detection were 25 and 8 ng mL−1 for Ge and Sn, respectively. For a 2 min in situ preconcentration time, sensitivity enhancement, compared to FAAS, were 10 and 14 folds for Ge and Sn, respectively, using hydride generation atom trapping technique. The sensitivity can be further improved by increasing the collection time. The relative standard deviations (RSDs) are of the order of 5–10% for this hyphenated technique. The designs studied include slotted tube, single silica tube, and integrated atom trap water-cooled atom traps. The accuracy of this method was tested by analyses of BCS-CRM No.346 (Alloy), GBW 07302 (Stream Sediment), PACS-1 (Marine Sediment), NBS SRM 1633a (Coal Fly Ash), and NIST SRM 1643e (Trace Element in Water) certified reference materials. Agreement between analytical results and certified values for the test elements Ge and Sn (in the range of 1.7–91.0 µg g−1) were in agreement with recommended values. The measured Ge and Sn contents in five referenced materials were in satisfactory agreement with the certified values. The hyphenated technique was applied for germanium and tin determination in coal fly ash, soil, sediment, garlic, sewage, and river water.

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Determination of trace amounts of tin by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine

Determination of Impurities in High Pure Copper by Electrolytic Separation-Inductively Coupled Plasma Mass Spectrometry

Determination of trace elements in high purity nickel by high resolution inductively coupled plasma mass spectrometry

Thin Film Hydride Generation: Determination of Ultra-Trace Copper by Flow Injection in Situ Hydride Trapping Graphite Furnace AAS

The Determination of Trace Amounts of Tin by Flow-Injection Hydride Generation Atomic-Absorption Spectrometry with On-Line Ion-Exchange Separation and Preconcentration.

Determination of Germanium, Arsenic, Tin, Selenium, and Antimony by Plasma Emission Spectrometry with Hydride Generation and Chromatographic Separation

Determination of Selenium and Tellurium in Pure Cathode Copper by Hydride Generation-Atomic Fluorescence Spectrometry

Semi-automatic determination of tin in marine materials by continuous flow hydride generation inductively coupled plasma atomic emission spectrometry

Determination of Trace Metal Impurities in High Pure Tin Oxide Electrode Material by Inductively Coupled Plasma Mass Spectrometry

Hydride Generation-Atomic Fluorescence Spectrometric Determination of Cadmium in Pure Copper

Quantification of Trace Amounts of Impurities in High Purity Cobalt by High Resolution Inductively Coupled Plasma Mass Spectrometry

Determination of Platinum, Palladium and Rhodium in Biological and Environmental Samples by Low Temperature Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry with Diethyldithiocarbamate As Chemical Modifier

Determination of Germanium and Tin and Inorganic Tin Species by Hydride Generation in Situ Trapping Flame Atomic Absorption Spectrometry

Determination of Arsenic, Antimony, Bismuth, Selenium and Tin in Biological and Environmental Samples by Continuous Flow Hydride Generation ICP-AES Without Gas-Liquid Separator

Determination of Rare Impurities in High-Purity Germanium and Germanium Oxide by Inductively Coupled Plasma Atomic Emission Spectrometry

Electrochemical hydride generation for the simultaneous determination of hydride forming elements by inductively coupled plasma-atomic emission spectrometry

Electrothermal Atomic-Absorption Spectrometric Determination of Ultra-Trace Amounts of Tin by In-Situ Preconcentration in A Graphite Tube Using Flow-Injection Hydride Generation with Online Ion-Exchange Separation

Convenient method for the determination of trace amounts of germanium by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine and L-cysteine

Simultaneous Determination of Copper, Cadmium and Cobalt in Zinc Electrolyte by Inductively Coupled Plasma Atomic Emission Spectrometry