Abstract:Background: Platinum (Pt), palladium (Pd), rhodium (Rh) and iridium (Ir) are platinum group elements (PGEs) and also important elements of geochemistry and environmental chemistry with the similar physic-chemical properties, which have been widely used in industry and laboratory. However, due to the low abundance and inhomogeneous distribution in natural ore as well as the nugget effect, the accurate determination of PGEs has been a challenge to analytical chemistry. Methods: In this work, a novel fire assay method was reported for the determination of ultra-trace Pt, Pd, Rh and Ir in geochemical samples. Tin powder (Sn) instead of stannic oxide (SnO 2 ) was used as a fire assay collector to reduce the melting temperature from 1250°C to 1050°C, the escape of molten material caused by high temperature was successfully avoided. Tin bead was compressed into thin slice and dissolved by HCl. For the target Pt, Pd, Rh and Ir, HCl insoluble substance such as PtSn 4 , PdSn 4 , RhSn 4 and Ir 3 Sn 7 were formed and separated from matrix by filtering. The metal compounds precipitate together with filter paper were microwave-assisted completely digested by aqua regia (50%, v/v), thence the sample solution was determined by inductively coupled plasma mass spectrometry (ICP-MS). Results: Compared with nickel oxide and lead oxide in nickel sulfide /lead fire assay, the reagent blank of tin powder were relatively low and could be directly employed in tin fire assay to collect Pt, Pd, Rh and Ir without purifying. Moreover, the harm of nickel oxide and lead oxide to the analyst and environment was avoided by using the non-toxic tin powder. The decomposition method of chromite and black shale was investigated as well as the amount of tin powder and flour, microwave digestion program for the determination of Pt, Pd, Rh and Ir were optimized. Besides, the influence of mass spectrum interference of co-existing elements was discussed and the standard mode and kinetic energy discrimination collision pool mode were compared. Under the optimal conditions, excellent curve fitting of Pt, Pd, Rh and Ir were obtained between 0.01~100 ng mL -1 , with the correlation coefficients exceeding 0.9996. The detection limits were from 0.003 ng g -1 to 0.057 ng g -1 . Conclusion: The developed method was applied to analyze the Chinese Certified Reference Materials and the determined values were in good agreement with the certified values.

Semi-automatic determination of tin in marine materials by continuous flow hydride generation inductively coupled plasma atomic emission spectrometry

The Determination of Trace Amounts of Tin by Flow-Injection Hydride Generation Atomic-Absorption Spectrometry with On-Line Ion-Exchange Separation and Preconcentration.

Determination of trace amounts of tin by hydride generation direct current plasma atomic emission spectrometry: interference reduction by L-cystine

Simultaneous Quantification of Tin and Lead Species in Antarctic Krill and Fish by Interfacing High-Performance Liquid Chromatography with Inductively Coupled Plasma Mass Spectrometry Based on Strong Cation-Exchange and Amphion Columns

Electronic Tongue Analysis System for Detection of Heavy Metal

Determination of hydride-forming elements in high purity coppers by inductively coupled plasma atomic emission spectrometry

Determination of Arsenic in Steel by Continuous-Flow Hydride Generation Icp-Aes Using A Low Power System

Determination of Germanium and Tin and Inorganic Tin Species by Hydride Generation in Situ Trapping Flame Atomic Absorption Spectrometry

Preconcentration by coprecipitation of arsenic and tin in natural waters with a Ni-pyrrolidine dithiocarbamate complex and their direct determination by solid-sampling atomic-absorption spectrometry

Simultaneous Determination of Ultra-trace Pt, Pd, Rh and Ir in Geochemical Samples by Inductively Coupled Plasma Mass Spectrometry Following Tin Fire Assay Preconcentration and Microwave Digestion

Direct Determination of Lead and Cadmium in Distilled Spirits by Inductively Coupled Plasma Mass Spectrometry Coupled with Chip-Based Microflow Injection System

Off-line separation and determination of inorganic arsenic species in natural water by high resolution inductively coupled plasma mass spectrometry with hydride generation combined with reaction of arsenic(V) and L-cysteine

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Determination of Trace Tin by Anodic Stripping Voltammetry at A 1-(3-nitrophenyl)-3-(4-phenylazophenyl)triazen Modified Carbon Paste Electrode

Simultaneous preconcentration and quantification of ultra-trace tin and lead species in seawater by online SPE coupled with HPLC-ICP-MS

A new continuous hydride generator for the determination of arsenic, Antimony and tin by hybride generation atomic absorption spectrometry

Direct determination of tin in whole blood and urine by GF AAS

Hyphenation Of C-18 Gel Silica Column And Flow Injection With Inductively Coupled Plasma-Mass Spectrometry And Its Application On The Seawater Analysis

Determination of trace lead by hydride generation–inductively coupled plasma–mass spectrometry

Electrochemical hydride generation for the simultaneous determination of hydride forming elements by inductively coupled plasma-atomic emission spectrometry

Determination of Cr and Ni in Seawater by High-Resolution Continuum Source Electrothermal Atomic Absorption Spectrometry