Abstract:A microfluidic sub-microliter sample introducing system was developed for direct analysis of Chinese rice wine by inductively coupled plasma mass spectrometry (ICP-MS). It consisted of a microfluidic chip integrating variable-volume sampling channels (0.1–0.8μL), an eight-way multi-functional valve used in flow injection analysis (FIA), a syringe pump and a peristaltic pump of the Ar ICP-MS instrument. Three solutions, i.e., 15, 40 and 100gL−1 glucose in 20% ethanol were used to simulate Chinese rice wine of the dry type, the semidry type and the semisweet type, each. The effects of their volume introduced into ICP-MS on the plasma stability and ICP-MS intensities were studied. The experimental results showed that neither alteration of plasma stability nor carbon deposition was observed when the sampling volume of 20% ethanol containing 100gL−1 glucose was downscaled to 0.8μL. Further reducing the sampling volume to 0.4μL, no significant difference between the intensities of multi-element standard prepared in three simulated Chinese rice wine matrices and those in aqueous solution was observed. It indicated no negative effect of Chinese rice wine matrix on the ICP-MS intensities. A sampling volume of 0.4μL was considered to be a good compromise between sensitivity and matrix effect. The flow rate of the carrier was chosen as 20μL min−1 for obtaining peaks with the highest peak height within the shortest time. Based on these observations, a microflow injection (μFI) method for the direct determination of cadmium and lead in Chinese rice wine by ICP-MS using an external aqueous calibration was developed. The sample throughput was 45h−1 with the detection limit of 19.8 and 10.4ngL−1 for Cd and Pb, respectively. The contents of Cd and Pb in 10 Chinese rice wine samples were measured. The results agreed well with those determined by ICP-MS with the conventional sampling system after microwave assisted digestion. The recoveries of three Chinese rice wine samples ranged between 95.5 and 102.8%. Furthermore, the determined contents of Cd and Pb in a certified reference material of red wine (GBW 10031) and a quality control test material of wine (FAPAS T07163QC) by the proposed method were in fairly good accordance with the certified/assigned values. All results verified the accuracy of our method.

Direct Determination of Lead and Cadmium in Distilled Spirits by Inductively Coupled Plasma Mass Spectrometry Coupled with Chip-Based Microflow Injection System

A Micro-Fluidic Sub-Microliter Sample Introduction System for Direct Analysis of Chinese Rice Wine by Inductively Coupled Plasma Mass Spectrometry Using External Aqueous Calibration

Determination of Cr,As,Cd,Hg and Pb in various alcohol samples by inductively coupled plasma mass spectrometry

Dispersive liquid–liquid microextraction combined with flow injection inductively coupled plasma mass spectrometry for simultaneous determination of cadmium, lead and bismuth in water samples

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Determination of Platinum in Human Plasma by Microchip-based Nanoflow Injection and Inductively Coupled Plasma Mass Spectrometry

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Integration of Flow Injection Capillary Liquid Electrode Discharge Optical Emission Spectrometry and Microplasma-Induced Vapor Generation: A System for Detection of Ultratrace Hg and Cd in a Single Drop of Human Whole Blood.

Rapid Determination of Ethyl Carbamate in Chinese Liquor via a Direct Injection Mass Spectrometry with Time-Resolved Flash-Thermal-Vaporization and Acetone-Assisted High-Pressure Photoionization Strategy.

Coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation.

Determination of Lead and Cadmium in Soy Sauce by Inductively Coupled Plasma-mass with Solid Phase Extraction

Minimization of mass interferences in quadrupole inductively coupled plasma mass spectrometric (ICP-MS) determination of palladium using a flow injection on-line displacement solid-phase extraction protocol

Direct determination of cadmium in foods by solid sampling electrothermal vaporization inductively coupled plasma mass spectrometry using a tungsten coil trap

Determination of Cadmium in Environmental and Biological Samples by ID-ICP-MS

Headspace versus direct injection for the quantitation of methanol, ethyl acetate, and fusel oils in distilled spirits by gas chromatography - Flame ionization detection

Highly Efficient Photochemical Vapor Generation for Sensitive Determination of Trace Inorganic Tin by Inductively Coupled Plasma Mass Spectrometry

Direct Determination of Tellurium in Geological Samples by Inductively Coupled Plasma Mass Spectrometry Using Ethanol As a Matrix Modifier

Simultaneous Determination of Tin, Germanium and Molybdenum by Diode Array Detection–flow Injection Analysis with Partial Least Squares Calibration Model

Determination of 32 Trace Elements in Maotai Liquor by ICP-MS

Hollow-fiber Liquid-Phase Microextraction Prior to Low-Temperature Electrothermal Vaporization ICP-MS for Trace Element Analysis in Environmental and Biological Samples.

Determination of lead by flow injection/coupled chemiluminescence reaction