Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

A Tunnel Diode Body Contact Structure for High-Performance SOI MOSFETs

Enhanced Radiation Hardness in SOI MOSFET with Embedded Tunnel Diode Layer

T-Shaped Body Silicon-on-Insulator (SOI) MOSFET

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

Analysis of a High-Performance Ultra-Thin Body Ultra-Thin Box Silicon-on-insulator MOSFET with the Lateral Dual-Gates: Featuring the Suppression of the DIBL

Enhanced Critical Electrical Characteristics in a Nanoscale Low-Voltage SOI MOSFET With Dual Tunnel Diode

Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Experimental Results on Drain and Source on Insulator MOSFETs Fabricated by Local SIMOX Technology

Simulation of a Novel Schottky Body-Contacted Structure Suppressing Floating Body Effect in Partially-Depleted SOI nMOSFET's

Eliminating the Floating-Body Effects in a Novel CMOS-compatible Thin-Soi LDMOS

A High Figure-Of-Merit Soi Mosfet with A Double-Sided Charge Oxide-Trench

Ultra-low temperature radio-frequency performance of partially depleted silicon-on-insulator n-type metal–oxide–semiconductor field-effect transistors with tunnel diode body contact structures

Characterization of DC, Analog/rf, and Low Frequency Noise in Silicon-on-insulator Nmosfets with Different Body-Contact Structures

High-Voltage SOI Deep Trench LDMOS with Quasi Vertical Super Junction Structure

High performance SiC trench-type MOSFET with an integrated MOS-channel diode

Novel Localized-SOI MOSFET's Combining the Advantages of SOI and Bulk Substrates for Highly-Scaled Devices

A Novel Drain Source On Insulator (Dsoi) Structure To Fully Suppress The Floating-Body And Self-Heating Effects

Improvement of SOI Trench LDMOS Performance with Double Vertical Metal Field Plate

High performance tunnel field-effect transistor by gate and source engineering.

A Novel Super-Junction DT-MOS with Floating p Regions to Improve Short-Circuit Ruggedness

Patterned Buried Oxide Layers under A Single Mosfet to Improve the Device Performance