Abstract:The common nonpolar switching behavior of binary oxide-based resistive random access memory devices (RRAMs) has several drawbacks in future application, such as the requirements for a high forming voltage, a large reset current, and an additional access device to settle the sneak-path issue. Herein, we propose the tuning of the switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer, and a case study on Ta2O5-Ta systems is provided. The devices are designed to be Pt/Ta2O5(5 - x/2)/Ta(x)/Ta2O5(5 - x/2)/Pt with x = 0, 2, or 4 nm. The reference devices without the Ta nanolayer exhibit an expected nonpolar switching behavior with a high forming voltage of similar to-4.5 V and a large reset current of >10 mA. In contrast, a self-compliance bipolar switching behavior with a low forming voltage of similar to-2 V and a small reset current of <1 mA is observed after inserting a 2 nm Ta nanolayer. When the Ta nanolayer is increased to 4 nm, a complementary resistive switching (CRS) behavior is found, which can effectively settle the sneak-path issue. The appearance of CRS behavior suggests that a thin Ta nanolayer of 4 nm is robust enough to act as an inner electrode. Besides, the behind switching mechanisms are thoroughly discussed with the help of a transmission electron microscope and temperature-dependent electrical measurements. All these results demonstrate the feasibility of tuning switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer and might help to advance the commercialization of binary oxide-based RRAMs.

A TaOx Based Threshold Switching Selector for the RRAM Crossbar Array Memory

CuAg/Al 2 O 3 /cuag Threshold Switching Selector for RRAM Applications

Conduction mechanism of a TaO(x)-based selector and its application in crossbar memory arrays

Conduction Mechanism of A Taox-Based Selector and Its Application in Crossbar Memory Arrays

Flexible Cation-Based Threshold Selector for Resistive Switching Memory Integration

A New Dynamic Selector Based on the Bipolar RRAM for the Crossbar Array Application

Occurrence of Resistive Switching and Threshold Switching in Atomic Layer Deposited Ultrathin (2 nm) Aluminium Oxide Crossbar Resistive Random Access Memory

Ta0x/Hf02-based RRAM with Self-Selective Feature Caused by Current Compliance Modulation

1S1R Device with Self-Compliance Property for High Density Cross-Point Memory Applications

Realizing Bidirectional Threshold Switching in Ag/Ta2O5/Pt Diffusive Devices for Selector Applications

Low-cost bidirectional selector based on Ti/TiO2/HfO2/TiO2/Ti stack for bipolar RRAM arrays

Study of the Bipolar Resistive‐switching Behaviors in Pt/GdOx/TaNx Structure for RRAM Application

Ta0x/Hf0<inf>2</inf>-based RRAM with self-selective feature caused by current compliance modulation

The Improved Resistive Switching Properties of TaOx-based RRAM Devices by Using WNx As Bottom Electrode

Oxide based two diodes–one resistor structure for bipolar RRAM crossbar array

Tuning The Switching Behavior Of Binary Oxide-Based Resistive Memory Devices By Inserting An Ultra-Thin Chemically Active Metal Nanolayer: A Case Study On The Ta2o5-Ta System

Ultralow Power Switching of Ta2O5/AlOXbilayer Synergistic Resistive Random Access Memory

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

Novel bipolar TaOx-based Resistive Random Access Memory

Resistance Requirements of Threshold Switching Selectors in 1S1R Crossbar Array

CuAg/Al2O3/CuAg Threshold Switching Selector for RRAM Applications