Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Ta0x/Hf0<inf>2</inf>-based RRAM with self-selective feature caused by current compliance modulation

Ta0x/Hf02-based RRAM with Self-Selective Feature Caused by Current Compliance Modulation

Forming-Free HfOx-Based Resistive Memory with Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

1S1R Device with Self-Compliance Property for High Density Cross-Point Memory Applications

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

A TaOx Based Threshold Switching Selector for the RRAM Crossbar Array Memory

A TaO<sub>x</sub>-Based RRAM with Improved Uniformity and Excellent Analog Characteristics by Local Dopant Engineering

Self-Selection Effects and Modulation of Taox Resistive Switching Random Access Memory with Bottom Electrode of Highly Doped Si

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Forming-Less Unipolar Taox-Based Rram with Large Cc-Independence Range for High Density Memory Applications

Conduction mechanism of a TaO(x)-based selector and its application in crossbar memory arrays

Optimization of TiN/TaOx/HfO2/TiN RRAM Arrays for Improved Switching and Data Retention

Conduction Mechanism of A Taox-Based Selector and Its Application in Crossbar Memory Arrays

Attaining resistive switching characteristics and selector properties by varying forming polarities in a single HfO 2 -based RRAM device with a vanadium electrode.

High Performance Hfox -Based Resistive Ram Devices and Its Temperature Dependent Switching

Insight into interface behavior and microscopic switching mechanism for flexible HfO2 RRAM

Enhancing the Electrical Uniformity and Reliability of the HfO2-Based RRAM Using High- Permittivity Ta2O5 Side Wall

Self-compliance Multilevel Resistive Switching Characteristics in TiN/HfOx/Al/Pt RRAM Devices