Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Ta0x/Hf02-based RRAM with Self-Selective Feature Caused by Current Compliance Modulation

Ta0x/Hf0<inf>2</inf>-based RRAM with self-selective feature caused by current compliance modulation

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Forming-Free HfOx-Based Resistive Memory with Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

1S1R Device with Self-Compliance Property for High Density Cross-Point Memory Applications

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

A TaOx Based Threshold Switching Selector for the RRAM Crossbar Array Memory

Self-Selection Effects and Modulation of Taox Resistive Switching Random Access Memory with Bottom Electrode of Highly Doped Si

Optimization of TiN/TaOx/HfO2/TiN RRAM Arrays for Improved Switching and Data Retention

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Self-compliance Multilevel Resistive Switching Characteristics in TiN/HfOx/Al/Pt RRAM Devices

Compliance Current Effect on Switching Behavior of Hafnium Oxide Based RRAM

Conduction mechanism of a TaO(x)-based selector and its application in crossbar memory arrays

Understanding the Switching Oxide Defect Formation and Recovery on HfOx Based RRAM Device

Low Power and High Uniformity of HfOx-based RRAM Via Tip-Enhanced Electric Fields

Influence of Selector-Introduced Compliance Current on Hfox Rram Switching Operation

The current limit and self-rectification functionalities in the TiO2/HfO2 resistive switching material system

Forming-Less Unipolar Taox-Based Rram with Large Cc-Independence Range for High Density Memory Applications

Study on High-Resistance State Instability of TaOx-Based RRAM

Attaining resistive switching characteristics and selector properties by varying forming polarities in a single HfO 2 -based RRAM device with a vanadium electrode.

Programming Strategy Optimization of RRAM Fabricated by 28 nm Standard CMOS Process