Abstract:We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow, by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure electrode for the sensing capacitor. The improved flow greatly lowers the footing effect during deep reactive ion etching (DRIE), and increases the proof mass by 54% compared to the traditional way, resulting in both improved device quality and a higher yield rate. Acceleration in the X direction is sensed capacitively by varying the overlapped area of a differential capacitor pair, which eliminates the nonlinear behavior by fixing the parallel-plate gap. The damping coefficient of the sensing motion is low due to the slide-film damping. A large proof mass is made using DRIE, which also ensures that dimensions of the spring beams in the Y and Z directions can be made large to lower cross axis coupling and increase the pull-in voltage. The theoretical Brownian noise floor is 0.47 µg/Hz1/2 at room temperature and atmospheric pressure. The tested frequency response of a prototype complies with the low damping design scheme. Output data for input acceleration from −1 g to 1 g are recorded by a digital multimeter and show very good linearity. The tested random bias of the prototype is 130 µg at an averaging time of around 6 s.

An S-Z Domain Transformation Method for the Readout Circuit Design of Closed-Loop Micromechanical Capacitive Accelerometer

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

Design of Force-Balance Capacitive Accelerometer

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Verilog-A modeling and design of a micromachined capacitive accelerometer

Study of a Novel Micromachined Capacitive Accelerometer

Modeling and Noise Analysis of a Fence Structure Micromachined Capacitive Accelerometer System

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

Time Divided Architecture for Closed Loop MEMS Capacitive Accelerometer

An Offset-Compensated Switched-Capacitor Interface Circuit for Closed-Loop Mems Capacitive Accelerometer

A Low-Noise Closed-Loop Interface For High-G Capacitive Micro-Accelerometer

CMOS interface circuit for closed-loop accelerometer

A High-Voltage Closed-Loop SC Interface for a ± 50 G Capacitive Micro-Accelerometer with 112.4 Db Dynamic Range

A Closed-Loop Mems Accelerometer with Capacitive Sensing Interface Asic

System-level Simulation and Implementation for a High Q Capacitive Accelerometer with PD Feedback Compensation

A Novel Tunable Lateral Sensing Capacitive Silicon Micromachined Accelerometer with High Sensitivity

Programmable Readout Circuit For Capacitive Accelerometer

Noise analysis and characterization of a full differential CMOS interface circuit for capacitive closed-loop micro-accelerometer

A Novel Self-Test Structure for Time-Divided Closed-Loop MEMS Capacitive Accelerometer

A Low-Noise Low-Offset CMOS Readout Circuit for MEMS Capacitive Accelerometers