Abstract:This paper presents an analytical model to study the structural effects of a capacitive tactile sensor array on its capacitance changes and sensitivities. The tactile sensor array has 8 x 8 sensor units, and each unit utilizes the truncated polydimethylsiloxane (PDMS) pyramid array structure as the dielectric layer to enhance the sensing performance. To predict the capacitance changes of the sensor unit, it is simplified into a two-layered structure: upper polyethylene terephthalate (PET) film and bottom truncated PDMS pyramid array. The upper PET is modeled by a displacement field function, while each of the truncated pyramids is analyzed to obtain its stress-strain relation. Using the Ritz method, the displacement field functions are solved. The deformation of the upper electrodes and the capacitance changes of the sensor unit can then be calculated. Using the developed model, the structural effects of the truncated PDMS pyramid array and the PDMS bump on the capacitance changes and sensitivities are studied. To achieve the largest capacitance changes, the dimensions have been optimized for the sensor unit. To verify the developed model, we have fabricated the sensor array, and the average sensitivities of the sensor unit to the x-, y-, and z-axes force are 0.49, 0.50, and 0.32% mN(-1), respectively, while the model predicted values are 0.54, 0.54, and 0.35% mN(-1). Results demonstrate that the developed model can accurately predict the sensing performance of the sensor array and could be utilized for structural optimization.

Modeling and Noise Analysis of a Fence Structure Micromachined Capacitive Accelerometer System

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Modeling and Simulation of Micromachined Gyroscope

The Parasitic Capacitance's Influence on Noise in a MEMS Accelerometer Sensor

A New Modeling Method of MEMS System's Noise

Noise Analysis and Parameter Optimization of Digital MEMS Accelerometer System

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Design and Noise Analysis of A Sigma-Delta Capacitive Micromachined Accelerometer

Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma-Delta MEMS Capacitive Accelerometers

Verilog-A modeling and design of a micromachined capacitive accelerometer

System-Level Simulation of Vibratory Micromachined Gyroscope with Fence Structure

Simulation Of Vibratory Micromachined Gyroscope With Fence Structure

A Verilog-A Model for Capacitive MEMS Accelerometers

Modeling of the Simultaneous Switching Noise in High Speed Electronic Circuit with the Integral Equation Method and Vector Fitting Method

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

RESEARCH ON A MICRO-ACCELEROMETER’S SYSTEMIC MODELING BASED ON EQUIVALENT CIRCUIT METHOD

Error Analysis of a Spherical Capacitive Sensor for the Micro-Clearance Detection in Spherical Joints

Comprehensive Noise Modeling of Piezoelectric Charge Accelerometer with Signal Conditioning Circuit

Systematic Error Analysis and Modeling of MEMS Close-Loop Capacitive Accelerometer.