Abstract:High-precision microelectromechanical system (MEMS) accelerometers have wide application in the military and civil fields. The closed-loop microaccelerometer interface circuit with switched capacitor topology has a high signal-to-noise ratio, wide bandwidth, good linearity, and easy implementation in complementary metal oxide semiconductor (CMOS) process. Aiming at the urgent need for high-precision MEMS accelerometers in geophones, we carried out relevant research on high-performance closed-loop application specific integrated circuit (ASIC) chips. According to the characteristics of the performance parameters and output signal of MEMS accelerometers used in geophones, a high-precision closed-loop interface ASIC chip based on electrostatic time-multiplexing feedback technology and proportion integration differentiation (PID) feedback control technology was designed and implemented. The interface circuit consisted of a low-noise charge-sensitive amplifier (CSA), a sampling and holding circuit, and a PID feedback circuit. We analyzed and optimized the noise characteristics of the interface circuit and used a capacitance compensation array method to eliminate misalignment of the sensitive element. The correlated double sampling (CDS) technology was used to eliminate low-frequency noise and offset of the interface circuit. The layout design and engineering batch chip were fabricated by a standard 0.35 μm CMOS process. The active area of the chip was 3.2 mm × 3 mm. We tested the performance of the accelerometer system with the following conditions: power dissipation of 7.7 mW with a 5 V power supply and noise density less than 0.5 μg/Hz1/2. The accelerometers had a sensitivity of 1.2 V/g and an input range of ±1.2 g. The nonlinearity was 0.15%, and the bias instability was about 50 μg.

Time Divided Architecture for Closed Loop MEMS Capacitive Accelerometer

Design of Force-Balance Capacitive Accelerometer

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

A Stiffness-Tunable MEMS Accelerometer

A Novel Self-Test Structure for Time-Divided Closed-Loop MEMS Capacitive Accelerometer

Cmos Interface Circuitry For A Closed-Loop Capacitive Mems Accelerometer

An S-Z Domain Transformation Method for the Readout Circuit Design of Closed-Loop Micromechanical Capacitive Accelerometer

Design Of Readout Circuits Used For Micro-Machined Capacitive Accelerometer

Linearity Analysis of Closed-Loop Capacitive Accelerometer Due to Distance Mismatch Between Plates and the Influence of Compensation Capacitor Array

A Novel Digital Closed Loop MEMS Accelerometer Utilizing a Charge Pump.

Verilog-A modeling and design of a micromachined capacitive accelerometer

Research On Nonlinearity Of Closed-Loop Capacitive Accelerometer Resulting From Time-Division Force Feedback

A Verilog-A Model for Capacitive MEMS Accelerometers

CMOS interface circuit for closed-loop accelerometer

An Offset-Compensated Switched-Capacitor Interface Circuit for Closed-Loop Mems Capacitive Accelerometer

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

Design, Modelling, and Simulation analysis of a Single Axis MEMS-based Capacitive Accelerometer

A Pseudo-Differential Capacitive MEMS Accelerometer Analog Front-End Design

A low-noise CMOS interface circuit for closed-loop accelerometer

Research of Closed-Loop Detection Technology for Capacitive Microaccelerometer

A Closed-Loop Mems Accelerometer with Capacitive Sensing Interface Asic