Abstract:This paper presents characterization and compensation of the thermal bias drift of a MEMS accelerometer whose effective stiffness is electrostatically tuned to a low value with the help of the single-sided parallel plates (SSPPs) capacitors. A temperature drift model for the proposed accelerometer is built and the temperature effect on the mechanical stiffness and the circuit gains is characterized. The characterization reveals that the variations of the feedforward coefficient including the mechanical stiffness and the readout gain due to the temperature change play a significant role in the bias drift of output of the proposed closed-loop accelerometer. On the other hand, the variations of both feedback gain and tuning gain as a function of temperature are one-order-of-magnitude less than that of the feedforward coefficient. To calibrate the feedforward coefficient, an excitation signal as a form of AC reference displacement is introduced to drive the proof mass and the readout response is demodulated to calibrate the variance of the feedforward coefficient correspondingly. An open-loop compensation scheme for the temperature-induced bias drift using the variance of the calibrated response is proposed accordingly. Alternatively, the calibrated response can be controlled to a preset value by a new proportion integral derivative (PID) controller by the adjustment of the SSPP tuning voltage. The output of the PID controller is used for the calibration of the introduced bias from the electrostatic tuning force. Therefore, a closed-loop compensation of the thermal bias drift is achieved by remaining the feedforward coefficient while eliminating the calibrated bias. Experiments under a temperature cooling process and different tuning voltages are carried out to verify two proposed compensation schemes. The temperature drift coefficients (TDCs) of both compensated outputs exhibit at least one-order-of-magnitude reduction in response to the temperature change. When the effective stiffness of the accelerometer is tuned to about 4.19 N m(-1), the TDC of the compensated output using the proposed open-loop or closed-loop compensation schemes is reduced to about 0.1136 or 0.0391 mg degrees C-1, respectively and meanwhile, the Allan bias instability is slightly increased to 48.63 or 56.14 mu g, respectively.

Linearity Analysis of Closed-Loop Capacitive Accelerometer Due to Distance Mismatch Between Plates and the Influence of Compensation Capacitor Array

Analysis of the Frequency-Dependent Vibration Rectification Error in Area-Variation-Based Capacitive MEMS Accelerometers.

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

Characterization and Compensation of Thermal Bias Drift of a Stiffness-Tunable MEMS Accelerometer

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

Temperature Bias Drift Phase-Based Compensation for a MEMS Accelerometer with Stiffness-Tuning Double-Sided Parallel Plate Capacitors

A Real-Time Temperature Compensation Algorithm for a Force-Rebalanced MEMS Capacitive Accelerometer Based on Resonant Frequency.

Simulation Analysis on Characteristics of a Planar Capacitive Sensor for Large Scale Measurement

Temperature Drift Compensation of a Tuned Low Stiffness MEMS Accelerometer Based on Double-Sided Parallel Plates

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

Design of Force-Balance Capacitive Accelerometer

Analysis and compensation for nonlinearity of sandwich MEMS capacitive accelerometer induced by fabrication process error

Nonlinearity Analysis of Capacitance Accelerometer and Linearization Control

Research On Nonlinearity Of Closed-Loop Capacitive Accelerometer Resulting From Time-Division Force Feedback

Time Divided Architecture for Closed Loop MEMS Capacitive Accelerometer

Nonlinearity of a Closed-Loop Micro-accelerometer

Weak closed-loop adjusting of wide-range micro-machined accelerometer's nonlinearity

Nonlinearity Analysis of Closed-Loop ΣΔ Micro-Mechanical Accelerometer

EFFECT OF NON-PARALLEL PLATES OF FEEDBACK-BALANCED MICRO ACCELEROMETER ON RELIABLE OPERATION RANGE

Analytical Study and Thermal Compensation for Capacitive MEMS Accelerometer with Anti-Spring Structure

Combined Temperature Compensation Method for Closed-Loop Microelectromechanical System Capacitive Accelerometer