Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

One-Time-Programmable Memory in LTPS TFT Technology with Metal-Induced Lateral Crystallization

MILC Thin Film Transistor with Ultra-Thin Channel

Performance of Thin-Film Transistors with Ultrathin Ni-MILC Polycrystalline Silicon Channel Layers

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

Reliability and Memory Characteristics of Sequential Laterally Solidified Low Temperature Polycrystalline Silicon Thin Film Transistors with an Oxide–Nitride–Oxide Stack Gate Dielectric

Phase-Change Memory With Multifin Thin-Film-Transistor Driver Technology

Phase-change memory on thin-film-transistor technology

Embedded TFT nand-Type Nonvolatile Memory in Panel

Capacitorless 1T-DRAM on crystallized poly-Si TFT

Electrically Programmable-Erasable In-Ga-Zn-O Thin-Film Transistor Memory with Atomic-Layer-Deposited Al2o3/Pt Nanocrystals/Al2o3 Gate Stack

High-Density FinFET One-Time Programmable Memory Cell With Intra-Fin-Cell-Isolation Technology

One-Time Programmable Memory Based on ${\rm ZrTiO}_{x}$ Antifuse for Crossbar Memory Application Featuring High Speed Operation and Low Power Consumption

Cr Metal Thin Film Memory

A High-Density Large-Ratio Fuse Based Oxide Devices for One-time-programmable Memory Applications

Aging-Aware LTPO DTCO for Large-Scale Integrated Circuit-Driven Flexible Intelligent Sensing System

High-performance Amorphous In-Ga-Zn-O Thin-Film Transistor Nonvolatile Memory with a Novel P-Sno/n-sno2 Heterojunction Charge Trapping Stack

A New High-Density Twin-Gate Isolation One-Time Programmable Memory Cell in Pure 28-nm CMOS Logic Process

One Time Programmable Antifuse Memory Based on Bulk Junctionless Transistor

Zero-Mask Contact Fuse for One-Time-Programmable Memory in Standard CMOS Processes

14-nm FinFET 1.5 Mb Embedded High-K Charge Trap Transistor One Time Programmable Memory Using Differential Current Sensing