Abstract:A self‐aligned top‐gate amorphous InGaZnO thin‐film transistor (TFT) based capacitor‐less embedded dynamic random access memory cell is demonstrated using the simplest 3‐masks process, exhibiting a retention time of > 500 s. Decent performances of sub‐100 nm devices are achieved by the strengthened gate controllability and modified channel properties, revealing the great mass‐production potential of oxide‐driven monolithic‐3D memories. The capacitor–less embedded dynamic random access memory (eDRAM) based on oxide semiconductor (OS) transistors exhibits a promising future and thus has lead to a growing demand for nanoscale OS thin–film transistors (TFTs). In this work, a self–aligned top–gate (SATG) amorphous InGaZnO (a‐IGZO) TFT is demonstrated by using the simplest 3‐masks (3M) process, and the downscaling‐related issues are carefully addressed to strengthen its back–end–of–line (BEOL) compatibility and mass producibility. The gate insulator (GI) and associated interface defects of the TFTs are jointly optimized with 4–nm atomic‐layer‐deposited (ALD) AlOx on the pre‐oxidized a‐IGZO. The defects in a‐IGZO channel are further manipulated with a rapid thermal anneal (RTA) in oxygen. By virtue of the strengthened gate controllability and modified channel properties, the fabricated TFT with 97‐nm gate length (Lg) exhibits decent performance, such as a maximum on–state current (ION) of 32.4 μA μm−1, as well as clear linear and saturation characteristics. Based on such 3M SATG a‐IGZO TFTs with high device performance and inherently minimal parasitic capacitances, the developed capacitor‐less eDRAM bit cell achieves a wide sensing margin and a long retention time of over 500 s. A highly manufacturable oxide TFT technology for high–performance and high–density monolithic–3D (M3D) integration is thus well established.

Zero-Mask Contact Fuse for One-Time-Programmable Memory in Standard CMOS Processes

Low-Voltage and Low-Current Flash Memory Using Source Induced Band-to-Band Tunneling Hot Electron Injection to Perform Programming

A High-Density Large-Ratio Fuse Based Oxide Devices for One-time-programmable Memory Applications

11.3 A 10nm 32Kb low-voltage logic-compatible anti-fuse one-time-programmable memory with anti-tampering sensing scheme

A Compact CMOS Compatible Oxide Antifuse with Polysilicon Diode Driver

One-Time Programmable Memory Based on ${\rm ZrTiO}_{x}$ Antifuse for Crossbar Memory Application Featuring High Speed Operation and Low Power Consumption

High-Density FinFET One-Time Programmable Memory Cell With Intra-Fin-Cell-Isolation Technology

A New High-Density Twin-Gate Isolation One-Time Programmable Memory Cell in Pure 28-nm CMOS Logic Process

One-Time-Programmable Memory in LTPS TFT Technology with Metal-Induced Lateral Crystallization

A 0.5 Μm2 2-T Thin-Oxide OTP Antifuse with Reliability Enhanced by Auto Shut-off Program Logic for Low-Power Applications

Reliable Antifuse One-Time-Programmable Scheme With Charge Pump for Postpackage Repair of DRAM

14-nm FinFET 1.5 Mb Embedded High-K Charge Trap Transistor One Time Programmable Memory Using Differential Current Sensing

Three-transistor one-time programmable (OTP) ROM cell array using standard CMOS gate oxide antifuse

One Time Programmable Antifuse Memory Based on Bulk Junctionless Transistor

Silicon Carbide (SiC) Nanoelectromechanical Antifuse for Ultralow-Power One-Time-Programmable (OTP) FPGA Interconnects

A Novel CMOS FEOL-Embedded Asymmetrical FET for Capacitor-less and Long-Retention DRAM Based on 300mm Logic Foundry Platform

Z2-FET: Application in Image Sensing and Self-aligned Structure for Further Scaling Down

Inkjet-Printed Multi-Bit Low-Voltage Fuse-Type Write-Once-Read-Many Memory Cell

Novel Multi-Level Cell TFT Memory with an In–Ga–Zn-O Charge Storage Layer and Channel

3‐Masks‐Processed Sub‐100 nm Amorphous InGaZnO Thin‐Film Transistors for Monolithic 3D Capacitor‐Less Dynamic Random Access Memories

Progress in Z(2)-Fet 1T-Dram: Retention Time, Writing Modes, Selective Array Operation, and Dual Bit Storage