Abstract:N,N-Di-hydroxyethyl amine-3-propionic acid methyl ester was prepared in a nitrogen atmosphere. And SiO2-HBP-L was in situ synthesized by grafting from with the monomers and alpha-caprolactone. The structure and morphology were characterized by FTIR, XPS and TG analysis. The results show that the hyperbranched polyester is successfully grafted at the surface of nano-SiO2. Compared with the nano-SiO2, the SEM shows that the dispersion and compatibility of SiO2-HBP-L in the ethanol and rubber matrix is better. Then SiO2-HBP-L/SBR composites were prepared by using the direct mixing method. Vulcanization performance tests show that the curing time (T-90) of the composites are much shorter and the composites' total crosslinking density is increased with respect to SiO2/SBR composites. When the composites with 30 phr SiO2-HBP-L, the T-90 was reduced to 3.30 min. What is more, SiO2-HBP-L/SBR composites have a great improvement of mechanical properties and wear resistance. It shows that the tensile strength, elongation at break, tear strength and wear resistance of the composites are increasing with the increase of contents of SiO2-HBP-L. The tensile strength, elongation at break of the composites with 30 phr SiO2-HBP-L were 14.8 MPa and 22.2 kN/m(2), and its wear resistance decreased to 289.4 mm(3). Nano-SiO2 modified with long-subchain hyperbranched polyester (SiO2-HBP-L) was used in the preparation of SiO2-HBP-USBR composites. The results show that the performance of SiO2-HBP-L is better than that of nano-SiO2 in the reinforcement of SBR.

In-situ SiO2 Hybrid Modification of Rubber Powder and Its Application in PP

Preparation of in-situ silicone dioxide modified rubber powder and its application in natural rubber

Surface Modification of Halloysite/Sericite

Modification Of Mechanical And Color Properties Of Polypropylene With Colored Nano-Sio2 Prepared From Diatomite

The Relationship between Microstructure and Properties in PP/Rubber Powder/nano-CaCO3 Ternary Blends

Modification of mechanical and color properties of polypropylene with colored nano‐SiO<sub>2</sub> prepared from diatomite

Modifying scrap rubber powder and its use in the mortar

Preparation of Hyperbranched Polyester Modified Nano-Sio2 and Its Application in Sbr

Effect of sol-gel modified nano-SiO2 on the performance and crystallization of polypropylene

Hybrid modified wasted rubber powder and its hydration reaction in the cement-based material

The Influence of in Situ Modification of Silica on Filler Network and Dynamic Mechanical Properties of Silica‐filled Solution Styrene–butadiene Rubber

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Preparation and characterization of Si3N4/SBR nanocomposites with high performance

A Strategy to Prepare High Performance Starch/rubber Composites: in Situ Modification During Latex Compounding Process

Synergistic effect of compound rubber and SiO 2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites

Synergistic Effect of Compound Rubber and SiO2 Nanoparticles on Low-Temperature Toughening and Balanced Stiffness-Toughness of Random Copolymer Polypropylene Nanocomposites

Surface Modification of Silica by Two-Step Method and Properties of Solution Styrene Butadiene Rubber (SSBR) Nanocomposites Filled with Modified Silica

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

Modification of High-Density Polyethylene/Scrap Rubber Powder Composites

Study of Styrene Butadiene Rubber Reinforced by Polybutadiene Liquid Rubber-Modified Silica