Abstract:In order to improve the compatibility between native superfine down powder (NSDP) and polypropylene (PP), NSPD was surface-modified by grafting with a silane coupling agent. After modification of NSDP, Fourier-Transform infrared spectrometry was used to investigate the chemical reaction between NSDP and silane coupling agent, and the spectroscopy indicated that silane coupling agent was successfully grafted onto the particle surface. Modified and unmodified NSDP was used to reinforce PP membrane by hot-press method, and the morphology, thermal properties, melt mass-flow rate and mechanical properties of PP/NSDP hybrid membrane was investigated. The melt mass-flow rate, tensile stress, and break elongation of the hybrid membranes initially increased and then decreased with the increase of silane coupling agent concentration, which significantly correlated with the silane coupling agent amount that adhered on the particle surface. Up to 3% silane coupling agent concentration was sufficient to cover the NSDP surface and improve the compatibility between PP and NSDP. With continuously increasing of silane coupling agent concentration, the melt mass-flow rate and mechanical properties decreased, which ascribed to the decreasing bonding strength of entanglement network between long-chain hydrocarbon segments on NSDP surface and PP matrix. PP/NSDP hybrid membrane with excellent thermal and mechanical properties can be obtained by controlling the silane coupling agent concentration.

Modification of mechanical and color properties of polypropylene with colored nano‐SiO<sub>2</sub> prepared from diatomite

Modification Of Mechanical And Color Properties Of Polypropylene With Colored Nano-Sio2 Prepared From Diatomite

Filling And Coloring Effect Of Pearl Shell Powder And Dye-Loaded Pearl Shell Powder On Polypropylene

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Colorating and Mechanical Performance of Low-Density Polyethylene (Ldpe)/dye-Loaded Shell Powder (DPSP) Composites

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Mechanical and Thermal Properties of Low Density Polyethylene Composites Filled with Dye-Loaded Shell Powder

Study on the Properties and Structure of Polypropylene Modified with Nano-Sized CaCO_3

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Preparation, Characterization And Filling Effect Study Of Dye-Loaded Shell Powder On The Properties Of Ldpe Composite

Effect of Silane Coupling Agent on Physical Properties of Polypropylene Membrane Reinforced by Native Superfine down Powder

Effect of sol-gel modified nano-SiO2 on the performance and crystallization of polypropylene

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Bio-filler from Waste Shellfish Shell: Preparation, Characterization, and Its Effect on the Mechanical Properties on Polypropylene Composites.

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Light‐colored conductive nanorod‐mediated co‐continuous polypropylene/poly(butylene succinate) blends: Regulatory mechanism, morphology evolution, electrical, and optical properties

Modification of Polypropylene with Composite Nucleating Agents Containing 2,2-Methylene-bis-(4, 6-di-t-butylphenylene) Phosphate/Attapulgite/Silica Nano-particles

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

Effect of hydrophobic nano‐silica/β‐nucleating agents on the crystallization behavior and mechanical properties of polypropylene random copolymers