Abstract:The influence of different polyurethane prepolymers on the interfacial structure of bamboo flour/PBAT composite. This study focused on the preparation of bamboo flour/Poly (butylene adipate‐co‐terephthalate) (PBAT) composites with high bamboo flour content and high mechanical strength using polyurethane prepolymer as chemical–physical compatibilizer via in‐situ reaction. Additionally, this work explored the effects of different bamboo flour contents and different types of polyurethane prepolymers on the mechanical properties, morphology, thermodynamics, water absorption, and surface wettability of the bamboo flour/PBAT composites. The results showed that PBA‐based polyurethane prepolymer (PBAPU) was an effective compatibilizer, promoting the interfacial adhesion between bamboo flour and PBAT. The strength at break, elongation at break, and impact strength of composites with 50% bamboo flour content reached 19.56 MPa, 25.53%, and 12.8 KJ/m2. With the increase of bamboo flour content, the strength of composites was still higher. The addition of PBAPU enhanced the thermal stability, mechanical properties, water resistance, and hydroscopicity of the bamboo flour/PBAT composites. Furthermore, the compatibilization of PBA‐based polyurethane prepolymer on composites was better than that of PCL‐based polyurethane prepolymer. Overall, we provided an effective strategy for preparing renewable, green, and practical high‐bamboo flour composites. Highlights This work successfully prepared bamboo flour/PBAT composites with high bamboo content using an in‐situ melt blending reaction. A new interface structure of physical PBA‐PBA interaction between the PBAPU layer and PBAT matrix improved the compatibilization of the composites. PBAPU as a compatibilizer effectively improved the interface compatibility, thermal stability, and water resistance of Bamboo flour/PBAT blends. Bamboo flour/PBAT composites with high bamboo flour content have excellent mechanical properties.

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

Fabrication and reinforcement of ternary composites based on polypropylene matrix with bamboo particle/ultrafine bamboo-char

Fabrication and properties of polypylene matrix composites reinforced by ultrafine bamboo-char

Pyrolysis Kinetics and Mechanical Properties of Poly(lactic Acid)/bamboo Particle Biocomposites: Effect of Particle Size Distribution

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Improvements in Compatibility and Properties of Biocomposites Modified Through Nanosilica Attachment

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Role of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride Composites

Preparation and Characterization of Maleic Anhydride Compatibilized Poly(lactic acid)/Bamboo Particles Biocomposites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Mechanical and thermal properties of polypropylene (PP) composites filled with modified shell waste

Preparation and properties of poly (butylene adipate‐co‐terephthalate) composites with high bamboo flour content

An Investigation on the Comprehensive Property Assessment and Future Directions of Single Bamboo Fiber Reinforced Polypropylene Composites Fabricated by a Non-Woven Paving and Advanced Molding Process

Surface Modification of Shell Waste and Its Application in Polypropylene Composites

Bamboo powders effectively reinforcing the modulus of PBAT composites and creep resistance

Reinforcing the mechanical properties of bamboo fiber/low density polyethylene composites with modified bamboo-woven structure

Characterizations of poly-lactic acid/polypropylene filled with bamboo charcoal powder

PREPARATION PROCESS AND INTERFACE MODIFICATION ON THE MECHANICAL PROPERTIES OF BAMBOO FIBER/ POLYPROPYLENE CARBONATE COMPOSITES

Reinforcement of Polylactic Acid for Fused Deposition Modeling Process with Nano Particles Treated Bamboo Powder