Abstract:Progress in Rubber, Plastics and Recycling Technology, Ahead of Print. The influence mechanism of waste rubber particles (WRPs) on the workability, mechanical properties, and sound insulation performance of recycled aggregate sound insulation mortar (RCM) were investigated. According to the principle of volume fraction replacement of recycled fine aggregate by 0 to 50%, WRPs with a particle size of 1–4 mm were incorporated in various mixtures of RCM. Each RCM mixture was tested for workability, mechanical, and sound insulation performance. Mercury intrusion porosimetry was used to analyze the distribution of pores and their sizes inside the material, and X-ray diffraction and scanning electron microscopy were used to analyze the characteristics of the interfacial transition zones (ITZs) between the rubber particles and the cement paste. The results showed that, owing to the hydrophobicity of WRPs, greater WRPs content led to greater fluidity of the mortar mix and a smaller water retention rate. Notably, the rubber in the mortar did not contribute to the hydration reactivity of the cement paste, but it changed the crystal morphology and pore structure of ITZ hydration products. The RCM incorporating 3–10% WRPs produced the optimal pore structure through the aggregate effect, which increased its overall compactness and mechanical performance. Further increase of WRP content significantly improved the sound insulation performance while significantly reducing the strength. Moreover, there was a clear logarithmic relationship between the strength and impact sound level index. This new knowledge can be used to prepare RCM that meets the actual strength and sound insulation requirements of the floor. Thus, the resource utilization of solid waste can be expanded.

Modifying scrap rubber powder and its use in the mortar

Mortar with Substituted Recycled PET Powder: Experimental Characterization and Data-Driven Strength Predictive Models

Study of Workability of Mortar with Modified Waste Tire Rubber Powder SRP

Surface Modification of Halloysite/Sericite

Hybrid Modified Rubber Powder and Its Application in Cement Mortar

Effect of the modified waste rubber powder on the mechanical properties of mortar

A Study on the Properties of Composite Modified Mortar with Styrene–Butadiene Rubber Latex and Silica Fume

Investigation of the mechanical and shrinkage properties of plastic-rubber compound modified cement mortar with recycled tire steel fiber

In-situ SiO2 Hybrid Modification of Rubber Powder and Its Application in PP

Enhancing the Interfacial Properties of Recycled Rubber Aggregate Mortars Through Surface Modifications with Graphene Oxide Coating

STRUCTURE AND PROPERTIES OF SBR/SCRAP RUBBER POWDER ELASTOMERIC ALLOYS

Sustainable Cement Mortar with Recycled Plastics Enabled by the Matrix-Aggregate Compatibility Improvement

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Compound utilization of construction and industrial waste as cementitious recycled powder in mortar

Hybrid modified wasted rubber powder and its hydration reaction in the cement-based material

The Effect of Different Proportions of Waste Rubber Substitution on Alkali-Silica Reaction and Mechanical Properties in Mortars

Effects of waste rubber particles on workability, mechanical, and sound insulation properties of recycled aggregate mortar

Enhanced early hydration and mechanical properties of cement-based materials with recycled concrete powder modified by nano-silica

Effect of chemically modified recycled carbon fiber composite on the mechanical properties of cementitious mortar

Experimental Study on the Strength and Hydration Products of Cement Mortar with Hybrid Recycled Powders Based Industrial-Construction Residue Cement Stabilization of Crushed Aggregate

Effect of low-cost mussel-inspired poly(catechol/polyamine) modification of waste brick powder followed by grafting of epoxy elastomers on natural rubber composites