A Study on the Properties of Composite Modified Mortar with Styrene–Butadiene Rubber Latex and Silica Fume

Renwei Yan,Laifa Wang,Yongjun Ni,Shuowen Zhang,Zhenqing He,Bowen Guan

DOI: https://doi.org/10.3390/polym16050697

IF: 5

2024-03-05

Polymers

Abstract:To solve the problem of the poor abrasion resistance of concrete pavement surface mortar, this study substituted cement with equal amounts of styrene–butadiene rubber (SBR) latex and silica fume (SF) to investigate the effects of organic/inorganic material composite modification on the fluidity, drying shrinkage, mechanical properties, and abrasion resistance of cement mortar. Also in this study, the microstructure, product, and pore structure characteristics of the composite modified cement mortar were investigated using scanning electron microscope (SEM), X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and the Brunauer–Emmett–Teller (BET) method. This research found that the sole substitution of SF negatively impacted the mortar's fluidity and drying shrinkage yet enhanced its mechanical strength and abrasion resistance; the incorporation of SBR latex improved fluidity, reduced shrinkage, and increased flexural strength but adversely affected the compressive strength of the mortar. Additionally, the enhancement of the mortar's abrasion resistance with SBR latex was significantly greater than that with SF. When SBR latex and SF were used together as substitutes, the latex struggled to offset the negative impact of SF on mortar fluidity but effectively reduced shrinkage; SF compensated for the detrimental effect of the latex on compressive strength. Moreover, the primary role in enhancing the mortar's abrasion resistance was played by the latex. Microscopic tests showed that SBR latex and SF could increase the content of calcium silicate hydrate (C-S-H) gel, inhibit the formation of ettringite (AFt) and reduce carbonation, refine the pore size of cement mortar, and effectively improve the microstructure of mortar.

polymer science

What problem does this paper attempt to address?

This paper attempts to address the issue of poor abrasion resistance of concrete pavement surface mortar. Specifically, the authors studied the effects of organic/inorganic composite modification on the fluidity, drying shrinkage, mechanical properties, and abrasion resistance of mortar by partially replacing cement with styrene-butadiene rubber latex (SBR) and silica fume (SF). The paper also explores the microstructure, products, and pore structure characteristics of the composite modified mortar through methods such as scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and specific surface area and pore structure analysis (BET), aiming to understand the synergistic effect of SBR latex and silica fume in the mortar. In short, the main objective of the paper is to improve the abrasion resistance and other properties of concrete pavement mortar by adding SBR latex and silica fume.

A Study on the Properties of Composite Modified Mortar with Styrene–Butadiene Rubber Latex and Silica Fume

The Influence of Nano-Silica Composite Superabsorbent Polymer on the Autogenous Shrinkage of Mortar

Interactions Between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials

Rheological, mechanical, and abrasion characteristics of polymer-modified cement mortar and concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Physical and Chemical Influence of Polyacrylate Latex on Cement Mortars

Enhancement of physical and mechanical properties of polymer-based repair mortars using SBR (Styrene-Butadiene Rubber) and glass fiber reinforcement: Experimental and numerical investigation

Effect of Lithium Silicate Composite Sol on the Properties of Concrete Surface

Study on the performance and synergistic mechanism of cement mortar reinforced with combined superabsorbent polymers and basalt fibers admixture

Effect of steel slag powder, fly ash, and silica fume on the mechanical properties and durability of cement mortar

Effects of latex modification on fresh state consistency, short term strength and long term transport properties of cement mortars

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

A Study on the Mechanical and Wear-Resistance Properties of Hybrid Fiber Mortar Composites with Low Water-Cement Ratios

Effect of nano-SiO2/CaSO4 whisker–silica fume on the strength, drying shrinkage, and capillary water absorption of cement mortar

Rheological behaviour, setting time, compressive strength and microstructure of mortar incorporating supplementary cementitious materials and nano-silica

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Improvement in Durability and Mechanical Performance of Concrete Exposed to Aggressive Environments by Using Polymer

Influence of water-repellent admixtures ( Sitren and Stearate materials) on the microstructure and mechanical performance of conventional Portland cement paste and mortar

Effect of Epoxy Latexes on the Mechanical Behavior and Porosity Property of Cement Mortar with Different Degrees of Hydration and Polymerization

Comparative Study on the Effects of Various Modified Admixtures on the Mechanical Properties of Styrene-Acrylic Emulsion-Based Cement Composite Materials