Abstract:To realize the utilization of industrial solid waste resources and solve the shortage problem of pavement materials, this paper uses steel slag, mineral powder, and coal gangue to prepare a mixture. A uniform test with 2 factors and 6 levels was designed. Through regression analysis, response surfaces were established to study the mechanical properties of the coal gangue mixture. The hydrated products at different ages were microscopically analyzed by XRD and SEM. The durability including freeze-thaw cycles, dry and wet cycles, and immersion expansion rate were researched. The results show that the 7d unconfined compressive strength of the mixture reaches 2.14 – 6.46 MPa, with a 180d resilience modulus of 954 – 1098 MPa, and a 180d splitting tensile strength of 0.66 – 0.83 MPa. With the increase of steel slag content, the 7d unconfined compressive strength of the mixture first decreases and then increases. The content of mineral powder is positively correlated with the 7d unconfined compressive strength. The 180d compressive resilience modulus decreases first and then increases with the increase of steel slag and mineral powder content. The 180d splitting tensile strength is positively correlated with the content of steel slag and mineral powder. The mixture is less affected by freeze-thaw cycles, with mass loss rates of only 1.77 % – 2.13 %. The mass loss rate of the admixture is 0.87 % – 0.99 % after 10 dry and wet cycles, and the strength is slightly improved. The maximum expansion rate of the mixtures immersed in water for 10d is only 0.28 %. The hydrated reaction between steel slag, mineral powder and coal gangue promotes the formation of more hydration products such as AFt, C-S-H, CaAl2(SiO4), and Ca(OH)2. The C-S-H and CaAl2(SiO4) are intertwined into a dense network to wrap Ca(OH)2, which improves the compactness of the mixture and effectively resists the freeze-thaw expansion stress. The steel slag-mineral powder-coal gangue mixture meets the requirements of relevant norms and can be well used in pavement bases.

Experimental study on strength and abrasion-resistance enhancement admixture

Mechanical and Durability Properties of Sustainable Self-Compacting Concrete with Recycled Concrete Aggregate and Fly Ash, Slag and Silica Fume

The Influence and Application of Slag, Fly Ash, and Limestone Flour on Compressive Strength of Concrete Based on the Concrete Compressive Strength Development over Time (CCSDOT) Model

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Mechanical properties and durability of concrete modified with steel slag and silica fume

Durability and mechanical behaviors of steel slag powder concrete

Study on the Performance and Application of High Performance Pavement Portland Cement Concrete

Mechanical Properties and Durability of Steel Slag-mineral Powder-coal Gangue Mixture by Uniform Design for Pavement Base

Mechanical performance, microstructure, and damage model of concrete containing steel slag aggregate

Influence Of Steel Slag Powder On Pavement Performance And Durability Of Concrete

Effect of fillers on the mechanical properties and durability of steel slag concrete

Properties of High-Content Micro-Steel Fiber Self-Compacting Concrete Incorporating Fly Ash and Slag Powder Performance Study

Enhancing the post-fire behavior of steel slag normal-strength concrete by adding SCM

Applications of Steel Slag Powder and Steel Slag Aggregate in Ultra-High Performance Concrete

Improvement Mechanism of the Mechanical Properties and Pore Structure of Rubber Lightweight Aggregate Concrete with S95 Slag

The Influence of Slag Content on the Structure and Properties of the Interfacial Transition Zone of Ceramisite Lightweight Aggregate Concrete

Study on Road Performance of Cement Fly Ash Stabilized Steel Slag-Concrete Recycled Macadam

Investigating on the Pavement Performance of Multi-Source Solid Wastes by Cement and Fly Ash

Study on performance of high strength pumping concrete compounded by fly ash composite powder under low water-cement ratio

Synergistic Effects of Silica Fume And Steel Slag And Steel Slag In Advanced Concrete Composites

Preparation, mechanism, and application of silica fume–steel slag composite cementitious material based on the D-optimal mixture method