Abstract:With the increasing number of waste tires, rubberized concrete, as a sustainable building material, has garnered widespread attention for its performance and environmental benefits. This study utilized KH-570 modified rubber particles to replace ordinary sand in the preparation of concrete, assessing the workability, shrinkage performance, and axial compression characteristics of rubberized concrete, and establishing a stress-strain constitutive model. The research indicates that the introduction of rubber particles enhances the irregularity and roughness of particles within the concrete matrix, leading to increased inter-particle friction and a reduction in workability. Pre-treatment with KH-570 effectively improves workability, particularly when the rubber content is 15%. Rubberized concrete exhibits higher ductility and slower crack propagation rates, with a decrease in elastic modulus and peak stress as rubber content increases, indicating an enhancement in the deformability and toughness of the concrete. The KH-570 pre-treatment partially counteracts this trend and significantly improves the energy absorption capacity of the concrete. The addition of unmodified rubber particles leads to an increased shrinkage rate in concrete, while the surface pre-treatment with KH-570 enhances the adhesion of rubber to the cementitious matrix, mitigating concrete shrinkage. The proposed axial stress-strain constitutive model for rubberized concrete accurately predicts the mechanical characteristics during the transition from elastic to plastic behavior. Rubberized concrete significantly reduces carbon dioxide emissions per unit volume, especially in untreated rubberized concrete, and offers better cost-effectiveness. In the construction of airport patrol roads, rubberized concrete demonstrates excellent durability and lower maintenance costs. In summary, rubberized concrete not only improves the ductility and toughness of concrete but also offers significant environmental and economic benefits, making it a promising sustainable building material.

Effects of waste rubber particles on workability, mechanical, and sound insulation properties of recycled aggregate mortar

Sustainable Cement Mortar with Recycled Plastics Enabled by the Matrix-Aggregate Compatibility Improvement

A multi-scale investigation on recycled ceramic and rubber composite cement-based materials: Acoustic emission, NMR, molecular dynamics simulation

Thermal Conductivity of Fiber-Reinforced Foam Concrete Filled with Crumb Rubber Powders

Investigation of the mechanical and shrinkage properties of plastic-rubber compound modified cement mortar with recycled tire steel fiber

Experimental study on recycling rubber to increase the impact resistance of cement mortar

Engineering properties and sustainability assessment of recycled fibre reinforced rubberised cementitious composite

Experimental and numerical investigation on fracture characteristics of self-compacting concrete mixed with waste rubber particles

Rubberized mortar: The influence of aggregate granulometry in mechanical resistances and acoustic behavior

Deformation Characteristics of Rubber Waste Powder–Clay Mixtures

Experimental investigation of concrete prepared with waste rubber and waste glass

Engineering properties of crumb rubber alkali-activated mortar reinforced with recycled steel fibres

The Effect of Different Proportions of Waste Rubber Substitution on Alkali-Silica Reaction and Mechanical Properties in Mortars

Role of recycled concrete powder as sand replacement in the properties of cement mortar

Recycled Untreated Rubber Waste for Controlling the Alkali–Silica Reaction in Concrete

Mechanical properties and microscopic characterization of waste perlite powder as supplementary cementitious material

Effect of recycled polyester fiber reinforcement on the mechanical behavior and microstructure of red mud-improved volcanic ash

Performance analysis and engineering application of waste rubber crumbs in concrete

Enhancing the Interfacial Properties of Recycled Rubber Aggregate Mortars Through Surface Modifications with Graphene Oxide Coating

Experimental Research on the Performance of Recycled Waste Concrete Powder (RWCP) on Concrete

Influence of Incorporating Waste Rubber Crumbs on Shear Parameters of Recycled and Natural Materials