Abstract:In this paper, classical molecular dynamics and reactive molecular dynamics are used to study the glass transition temperature, thermal conductivity, and initial reaction of pyrolysis of methyl-phenyl-dimethoxy-silane-modified phenolic resins. The simulation results showed that silanes increased the glass transition temperature and thermal conductivity of phenolic resins, resulting in an increase in glass transition temperature from 426.4 K to 449.8 K and thermal conductivity from 0.21 W/(m·k) to 0.226 W/(m·k). To verify the accuracy of the simulation calculations, we experimentally tested the glass transition temperature and thermal conductivity of silane-modified phenolic resins. The results showed that the glass transition temperatures of phenolic resin and silane-modified phenolic resin were 333.5 K and 353.5 K, respectively, while the thermal conductivities were 0.221 W/(m·k) and 0.235 W/(m·k), respectively. The error between the simulated and experimental thermal conductivity values was 5 %. At the same time, the glass transition temperature did not match the experimental value due to the difference in cooling rate between the simulation and experiment. Then, it was corrected using the WFL equation at a low cooling rate, resulting in an error of about 1.6 % between the glass transition temperature and the experimental value. In addition, the silane-doped phenolic resin produced a large amount of protective gas during the pyrolysis process, which carries away heat as it evaporates and forms a reaction barrier. Since a silicon-oxygen bond replaces the phenolic hydroxyl group, the production of hydroxyl groups during pyrolysis is reduced. At the same time, the silicon radicals produced by silane pyrolysis form silicon hydroxides with the hydroxyl groups. This dramatically reduces the likelihood of hydroxyl groups oxidizing other functional groups, slowing down the formation of CO and increasing the carbon residual rate.

Analysis of Pyrolytic Process of Vinyl-containing Polysilazane PSN-1

Advanced in Polysiloxane-Based Thermoplastic Dynamic Vulcanizate by Reactive Extrusion

Thermochemical process occurring in PLD-derived SiC films during vacuum annealing

Theoretical and experimental investigations into the pyrolysis mechanisms of silicon-modified phenolic resin under high temperatures

Investigation of Thermal Crosslinking and Pyrolysis of Ladderlike Silsesquioxanes in Vacuum by XRD Measurements and Weight Analysis

Dimethylsilanone generation from pyrolysis of polysiloxanes filled with nanosized silica and ceria/silica

Assessing pyrolysis behavior of silicon-containing arylacetylene resin via experiments and ReaxFF MD simulations

Thermal Degradation Behaviors of Some Branched and Linear Polysiloxanes

High‐purity Stoichiometric Si3N4 Ceramics through Trimethylsilyl‐substituted Polysilazanes

Preparation and properties of silicon-containing benzoxazine with high thermal stability

Thermal degradation kinetics of functional polysiloxane with pendent γ-chloropropyl groups

The Thermal Degradation of Bisphenol

Sintering Process Analysis of Low Temperature Cofired Ceramics I Organics Pyrolysis in Low Temperature Phase

Mechanical properties and thermal stability of ambient-cured thick polysiloxane coatings prepared by a sol-gel process of organoalkoxysilanes

Insight into pyrolysis behavior of silicone-phenolic hybrid aerogel through thermal kinetic analysis and ReaxFF MD simulations

Structure and defect analysis of different polysilazane‐derived silicon carbide systems

Fast pyrolysis of silicones at low temperatures catalyzed by anatase titanium dioxide

Role of Liquid-Phase Amount in Ceramization of Silicone Rubber Composites and Its Controlling

A comprehensive study of pyrolysis characteristics of silicone-modified phenolic aerogel matrix Nanocomposites: Kinetic Analysis, ReaxFF MD Simulations, and ANN prediction

Synthesis and structure evolution of phenolic resin/silicone hybrid composites with improved thermal stability

A comparative theoretical and experimental investigation on thermal parameters and initial pyrolysis mechanism of methyl-phenyl-dimethoxy silane modified phenolic resin