Abstract:In this paper, classical molecular dynamics and reactive molecular dynamics are used to study the glass transition temperature, thermal conductivity, and initial reaction of pyrolysis of methyl-phenyl-dimethoxy-silane-modified phenolic resins. The simulation results showed that silanes increased the glass transition temperature and thermal conductivity of phenolic resins, resulting in an increase in glass transition temperature from 426.4 K to 449.8 K and thermal conductivity from 0.21 W/(m·k) to 0.226 W/(m·k). To verify the accuracy of the simulation calculations, we experimentally tested the glass transition temperature and thermal conductivity of silane-modified phenolic resins. The results showed that the glass transition temperatures of phenolic resin and silane-modified phenolic resin were 333.5 K and 353.5 K, respectively, while the thermal conductivities were 0.221 W/(m·k) and 0.235 W/(m·k), respectively. The error between the simulated and experimental thermal conductivity values was 5 %. At the same time, the glass transition temperature did not match the experimental value due to the difference in cooling rate between the simulation and experiment. Then, it was corrected using the WFL equation at a low cooling rate, resulting in an error of about 1.6 % between the glass transition temperature and the experimental value. In addition, the silane-doped phenolic resin produced a large amount of protective gas during the pyrolysis process, which carries away heat as it evaporates and forms a reaction barrier. Since a silicon-oxygen bond replaces the phenolic hydroxyl group, the production of hydroxyl groups during pyrolysis is reduced. At the same time, the silicon radicals produced by silane pyrolysis form silicon hydroxides with the hydroxyl groups. This dramatically reduces the likelihood of hydroxyl groups oxidizing other functional groups, slowing down the formation of CO and increasing the carbon residual rate.

A comprehensive study of pyrolysis characteristics of silicone-modified phenolic aerogel matrix Nanocomposites: Kinetic Analysis, ReaxFF MD Simulations, and ANN prediction

Insight into pyrolysis behavior of silicone-phenolic hybrid aerogel through thermal kinetic analysis and ReaxFF MD simulations

Theoretical and experimental investigations into the pyrolysis mechanisms of silicon-modified phenolic resin under high temperatures

Investigation of Thermal Transport Mechanism of Silicone-Modified Phenolic Matrix Nanocomposites with Different Pyrolysis Degrees

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Pyrolysis behavior of the nanoporous phenolic matrix and the resultant microstructure and property evolution in the composites

Molecular dynamics simulations of thermomechanical properties of silicone-modified phenolic polymer

Reactive Dynamics Simulation Study on the Pyrolysis of Polymer Precursors to Generate Amorphous Silicon Oxycarbide Structures

A comparative theoretical and experimental investigation on thermal parameters and initial pyrolysis mechanism of methyl-phenyl-dimethoxy silane modified phenolic resin

Investigation of Thermal Decomposition of Polymer Nanocomposites with Different Char Residues

Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations

Homogenization-based Analysis of Pyrolysis and Mechanical Degradation of Ablative Silica Fiber-Reinforced Phenolic Resin Composites

Three-dimensional Simulation of a Novel Microwave-Assisted Heating Device for Methyl Ricinoleate Pyrolysis

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Pyrolysis of Polysilazane Containing Vinyl-thiol Copolymer

Numerical Simulation of Decomposition of Polymer Nano-composites: Investigation of the Influence of the Char Structure

Pyrolysis mechanism and combustion behaviors of high impact polystyrene improved by modified ammonium polyphosphate and graphene

Insights into the pyrolysis mechanisms of epoxy resin polymers based on the combination of experiments and ReaxFF-MD simulation

Synthesis and structure evolution of phenolic resin/silicone hybrid composites with improved thermal stability

Synthesis and Characterization of Novel Phenolic Resin/silicone Hybrid Aerogel Composites with Enhanced Thermal, Mechanical and Ablative Properties

Thermal Decomposition Behavior of a Thermal Protection Coating Composite with Silicone Rubber: Experiment and Modeling