Abstract:In this paper, classical molecular dynamics and reactive molecular dynamics are used to study the glass transition temperature, thermal conductivity, and initial reaction of pyrolysis of methyl-phenyl-dimethoxy-silane-modified phenolic resins. The simulation results showed that silanes increased the glass transition temperature and thermal conductivity of phenolic resins, resulting in an increase in glass transition temperature from 426.4 K to 449.8 K and thermal conductivity from 0.21 W/(m·k) to 0.226 W/(m·k). To verify the accuracy of the simulation calculations, we experimentally tested the glass transition temperature and thermal conductivity of silane-modified phenolic resins. The results showed that the glass transition temperatures of phenolic resin and silane-modified phenolic resin were 333.5 K and 353.5 K, respectively, while the thermal conductivities were 0.221 W/(m·k) and 0.235 W/(m·k), respectively. The error between the simulated and experimental thermal conductivity values was 5 %. At the same time, the glass transition temperature did not match the experimental value due to the difference in cooling rate between the simulation and experiment. Then, it was corrected using the WFL equation at a low cooling rate, resulting in an error of about 1.6 % between the glass transition temperature and the experimental value. In addition, the silane-doped phenolic resin produced a large amount of protective gas during the pyrolysis process, which carries away heat as it evaporates and forms a reaction barrier. Since a silicon-oxygen bond replaces the phenolic hydroxyl group, the production of hydroxyl groups during pyrolysis is reduced. At the same time, the silicon radicals produced by silane pyrolysis form silicon hydroxides with the hydroxyl groups. This dramatically reduces the likelihood of hydroxyl groups oxidizing other functional groups, slowing down the formation of CO and increasing the carbon residual rate.

Insight into pyrolysis behavior of silicone-phenolic hybrid aerogel through thermal kinetic analysis and ReaxFF MD simulations

A comprehensive study of pyrolysis characteristics of silicone-modified phenolic aerogel matrix Nanocomposites: Kinetic Analysis, ReaxFF MD Simulations, and ANN prediction

Theoretical and experimental investigations into the pyrolysis mechanisms of silicon-modified phenolic resin under high temperatures

A comparative theoretical and experimental investigation on thermal parameters and initial pyrolysis mechanism of methyl-phenyl-dimethoxy silane modified phenolic resin

Assessing pyrolysis behavior of silicon-containing arylacetylene resin via experiments and ReaxFF MD simulations

Elucidating multiple-scale reaction behaviors of phenolic resin pyrolysis via TG-FTIR and ReaxFF molecular dynamics simulations

Molecular dynamics simulations of thermomechanical properties of silicone-modified phenolic polymer

Pyrolysis behavior of the nanoporous phenolic matrix and the resultant microstructure and property evolution in the composites

Investigating the pyrolysis mechanisms of three archetypal ablative resins through pyrolysis experiments and ReaxFF MD simulations

Preceramic polymer hybridized phenolic aerogels and the derived ZrC/SiC/C ceramic aerogels with ultrafine nanocrystallines

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Synthesis and structure evolution of phenolic resin/silicone hybrid composites with improved thermal stability

Improvement of the Thermal Insulation Performance of Silica Aerogel by Proper Heat Treatment: Microporous Structures Changes and Pyrolysis Mechanism

SIMULATING THE PYROLYSIS OF PHENOLIC RESIN USING REACTIVE MOLECULAR DYNAMICS

Facile synthesis of phenolic-reinforced silica aerogel composites for thermal insulation under thermal-force coupling conditions

Exploring the impact of backbone architecture on the thermal decomposition of silicon-containing arylacetylene resins

Water-assisted synthesis of phenolic aerogel with superior compression and thermal insulation performance enabled by thick-united nano-structure

Thermal Oxidation Behavior and Mechanisms for Silicon-Containing Arylacetylene Resins: Experimental and Reactive Force Field Molecular Dynamics Simulations

Thermally Insulating SiO2/PSA Composite Aerogels with Heat Resistance and Mechanical Properties via the Thiol-Yne Click Reaction

Insights into the pyrolysis mechanisms of epoxy resin polymers based on the combination of experiments and ReaxFF-MD simulation

Synthesis of Silicon Hybrid Phenolic Resins with High Si-Content and Nanoscale Phase Separation Structure