Abstract:Ablative thermal protection is a common thermal protection technology for recoverable spacecraft, which makes use of the decomposition, depolymerization, melting, evaporation, gasification or ionization of materials to transfer a large quantity of heat in order to ensure the safety of the internal device. The ablation-resistant properties of hybrid phenolic materials with 5 wt% SiC, SiO 2 and Al 2O 3 inorganic nano-particles were studied in this paper. Glass transition temperature (Tg) of hybrid phenolic materials with SiC, SiO 2 and Al 2O 3 inorganic nano-particles which studied by differential scanning calorimetry (DSC) increased by 6.31°C, 1.35°C and 4.93°C separately. This indicated that adding inorganic nano-particles hindered movement of molecular chain. Moreover the Tg values were also raised. Activation energies of thermal decomposition of different kinds of materials were calculated by Kissinger and Flynn-Wall-Ozawa method. It was found that after adding inorganic particles activation energy of thermal decomposition in the first stage decreased slightly, which made post-curing reaction easier. The degree of decreasing was: SiO 2>Al 2O 3>SiC. While in the third stage activation energy of thermal decomposition increased to improve heat resistance of materials at high temperatures. The degree of increasing was: Al 2O 3>SiC>SiO 2. The average linear ablation rate of glass fiber reinforced pure phenolic, phenolic with SiC hybrid, phenolic with SiO 2-hybrid and phenolic with Al 2O 3-hybrid tested by oxygen-acetylene ablation were 0.210 mm/s, 0.178 mm/s, 0.194 mm/s and 0.166 mm/s separately. The morphologies of composite materials observed by scanning electron microscopy (SEM) after ablation showed that glass fiber were melted during ablation, which formed a compact insulating layer at the surface. The carbon layer ablated beside the decomposed area kept the porous structure caused by ablation, which reduced thermal conduction.

Thermal behavior of phenolic-based ceramizable composites modified by nano-aluminum oxide

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

High temperature flexural strength, microstructure, phase evolution and anti-oxidation mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composite modified with TiB2 and B4C

Oxidation and Ablation Behavior of a Ceramizable Resin Matrix Composite Based on Carbon Fiber/phenolic Resin

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Structural and Thermal Behavior of a Novel Phenolic Resin and Its Composite with Excellent Ablative Performance

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Investigation of the thermal degradation kinetics of ceramifiable silicone rubber-based composite

Preparation and High Temperature Resistance of Modified Boron Phenolic Resin with Almandine Micropowder

Ceramicization mechanism and thermal insulation/ablative properties of hollow microspheres/boron phenolic composites

Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface

Preparation and Ablation Performance of Silica Modified Phenolic/carbon Fiber Composite

Thermal Stability, Mechanical Properties and Ceramization Mechanism of Epoxy Resin/Kaolin/Quartz Fiber Ceramifiable Composites

Ceramization of Coordinated Zr4+ and Hf4+ in Polysiloxane Conferring Silicone/phenolic Hybrid Resin with Excellent Thermal Protection

Mechanical property, oxidation resistance, and ceramization mechanism of MoSi2-SiB6 reinforced phenolic resin matrix composites

A Novel Fused SiO2 and h-BN Modified Quartz Fiber/Benzoxazine Resin Ceramizable Composite with Excellent Flexural Strength and Ablation Resistance

Effect of Mesophase Pitch Incorporation on the Ablation Behavior and Mechanism of Phenolic Composites

Thermal oxidation and compressive failure behavior of ZrSi2–B4C modified phenolic resin-based composite

Studies on ablation-resistant properties of inorganic nano-particles hybrid phenolic resin

Microstructural Interpretation of the Ablative Properties of Phenolic–quartz Hybrid Fabric Reinforced Phenolic Resin Composites