Abstract:Experimental to numerical studies of the gas‐blocking effect of NQF/MPA composites under the ablation heating condition. Lightweight phenolic ablative composites are considered to be the most reliable materials for thermal protection systems. However, improving the thermal ablation‐insulation performance of heritage phenolic aerogel‐based ablators for extremely complex environments is still necessary. Herein, from the perspective of enhancing the gas‐blocking effect, we design and fabricate a series of needle quartz fiber‐reinforced melamine‐phenolic aerogels (NQF/MPAs) composites by polycondensation of melamine and phenolic in a sol–gel process, followed by ambient drying. The effects of melamine content on the comprehensive performance are analyzed. The prepared nitrogen‐doped phenolic aerogel composites exhibit low density of 440–490 kg/m3, high tensile strength of 36.3–39.1 MPa, and low thermal conductivity of 0.041–0.043 W/(m·K) at room temperature. Simultaneously, the modified composite exhibits excellent high‐temperature insulation property with lower equivalent thermal conductivity of 0.045 W/(m·K) at 1000°C. In arc wind tunnel testing of 130 kW/m2 for 1000 s, the linear recession rates of the composites show a great improvement from 3.7 × 10−6 to 2.5 × 10−6 m/s with the proper introduction of melamine. Furthermore, a one‐dimensional finite element model is stablished, which indicate the introduction of melamine can significantly improve the mass flow rate of pyrolysis gas and the corresponding block factor is enhanced from 0.958 to 0.848. Highlights Economic sol–gel method and ambient drying for composites production. Phenolic aerogel‐based ablative composite with enhanced gas blocking effect. The pyrolysis gas blocking effect is controllable with melamine content. Combined experimental‐simulation approach for ablators designing.

Pre-oxidized mesophase pitch modified phenolic composites with mosaic-structured char layers and excellent ablation resistance

Hybridization of the Zinc-Based Organic Framework with Diphenylfenosundinyl Chloride and Its Combination with Hexaphenoxycyclotriphosphazene for Flame Retardancy of Epoxy Resin

Enhanced ablation resistance of carbon/phenolic composites based on mesophase pitch reinforced particles

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Enhancing ablation and oxidation resistance of phenolic resin with modified pickling asbestos

Thermal protection materials based on epoxy‐containing and phenyl‐containing polyhedral oligomeric silsesquioxane modified phenolic resin and phenolic resin/carbon fiber composites

Enhanced ablation resistance of phenolic composites through the construction of a sea-island nanostructured char layer via in-situ catalytic graphitization of incorporated Salen-Ni complex

3D needle-punched carbon/quartz fabric reinforced nanoporous phenolic composites with co-optimized mechanics, insulation and ablation

Mesophase pitch modified silicone rubber coatings with fence-like ceramic layer structures and excellent ablation resistance performance

Ceramicization mechanism and thermal insulation/ablative properties of hollow microspheres/boron phenolic composites

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Thermal behavior of phenolic-based ceramizable composites modified by nano-aluminum oxide

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB2/SiC

Lightweight nitrogen‐doped phenolic composites with enhanced thermal ablation‐insulation performance by improving pyrolysis gas blocking effect

Enhanced mechanical, thermal and ablation properties of carbon fiber/BPR composites modified by mica synergistic MoSi2 at 1500 °C

In situ construction of fiber‐supported micro‐porous char structure to enhance anti‐ablative performance of silicone rubber composites

Mechanical property, oxidation resistance, and ceramization mechanism of MoSi2-SiB6 reinforced phenolic resin matrix composites

Synthesis and characterization of novel phenolic resins containing aryl‐boron backbone and their utilization in polymeric composites with improved thermal and mechanical properties

Ablation behavior of boron-modified phenolic resin irradiated by high-energy continuous-wave laser and its evolution of carbon structure

Effect of Various Fibers on the Ablation Resistance of Poly(diaryloxyphosphazene) Elastomer

Oxidation Behavior of Carbon Fibers in Ceramizable Phenolic Resin Matrix Composites at Elevated Temperatures