Abstract:Experimental to numerical studies of the gas‐blocking effect of NQF/MPA composites under the ablation heating condition. Lightweight phenolic ablative composites are considered to be the most reliable materials for thermal protection systems. However, improving the thermal ablation‐insulation performance of heritage phenolic aerogel‐based ablators for extremely complex environments is still necessary. Herein, from the perspective of enhancing the gas‐blocking effect, we design and fabricate a series of needle quartz fiber‐reinforced melamine‐phenolic aerogels (NQF/MPAs) composites by polycondensation of melamine and phenolic in a sol–gel process, followed by ambient drying. The effects of melamine content on the comprehensive performance are analyzed. The prepared nitrogen‐doped phenolic aerogel composites exhibit low density of 440–490 kg/m3, high tensile strength of 36.3–39.1 MPa, and low thermal conductivity of 0.041–0.043 W/(m·K) at room temperature. Simultaneously, the modified composite exhibits excellent high‐temperature insulation property with lower equivalent thermal conductivity of 0.045 W/(m·K) at 1000°C. In arc wind tunnel testing of 130 kW/m2 for 1000 s, the linear recession rates of the composites show a great improvement from 3.7 × 10−6 to 2.5 × 10−6 m/s with the proper introduction of melamine. Furthermore, a one‐dimensional finite element model is stablished, which indicate the introduction of melamine can significantly improve the mass flow rate of pyrolysis gas and the corresponding block factor is enhanced from 0.958 to 0.848. Highlights Economic sol–gel method and ambient drying for composites production. Phenolic aerogel‐based ablative composite with enhanced gas blocking effect. The pyrolysis gas blocking effect is controllable with melamine content. Combined experimental‐simulation approach for ablators designing.

Ceramicization mechanism and thermal insulation/ablative properties of hollow microspheres/boron phenolic composites

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Mechanical property, oxidation resistance, and ceramization mechanism of MoSi2-SiB6 reinforced phenolic resin matrix composites

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Thermal behavior of phenolic-based ceramizable composites modified by nano-aluminum oxide

Preceramic polymer hybridized phenolic aerogels and the derived ZrC/SiC/C ceramic aerogels with ultrafine nanocrystallines

Enhanced mechanical, thermal and ablation properties of carbon fiber/BPR composites modified by mica synergistic MoSi2 at 1500 °C

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB2/SiC

The effects of ZrSi 2 on the ablation and insulation performances of low-density carbon-phenolic composites

Yttrium Silicate‐Coated Carbon Fiber Reinforced Phenolic Aerogel‐like Composites with Low Density and Low Ablation

Thermal protection materials based on epoxy‐containing and phenyl‐containing polyhedral oligomeric silsesquioxane modified phenolic resin and phenolic resin/carbon fiber composites

Thermal oxidation and compressive failure behavior of ZrSi2–B4C modified phenolic resin-based composite

A Novel Fused SiO2 and h-BN Modified Quartz Fiber/Benzoxazine Resin Ceramizable Composite with Excellent Flexural Strength and Ablation Resistance

Lightweight nitrogen‐doped phenolic composites with enhanced thermal ablation‐insulation performance by improving pyrolysis gas blocking effect

Preparation of Phosphorus/Hollow Silica Microsphere Modified Polyacrylonitrile-Based Carbon Fiber Composites and Their Thermal Insulation and Flame Retardant Properties

3D needle-punched carbon/quartz fabric reinforced nanoporous phenolic composites with co-optimized mechanics, insulation and ablation

Oxidation and ablation behaviors of carbon fiber/phenolic resin composites modified with borosilicate glass and polycarbosilane interface

Enhanced ablation resistance of phenolic composites through the construction of a sea-island nanostructured char layer via in-situ catalytic graphitization of incorporated Salen-Ni complex

2.5D quartz fabric reinforced nanoporous phenolic composites with weakened heat transfer and optimized mechanical properties

Ablation resistance of C/C-SiCo nanoporous ceramic composites with TaSi2-MoSi2-ZrB2-borosilicate glass coating