Abstract:Fiber reinforced composite materials are widely used in the aerospace industry due to their high strength to weight ratio. One of their applications is as an ablative material placed at the outermost layer of a thermal protection systems (TPS). A TPS requires the ablative material to have low density, low thermal conductivity, high temperature resistance, formation of a stable and high shear strength char. This paper introduces a carbon fiber (CF) reinforced polysiloxane (UHTR) composite material processed and fabricated in a laboratory environment. The fabrication method of this material is illustrated in detail. Thermal, ablation, flammability, and mechanical properties of the CF/UHTR material are characterized and compared to a commercial model ablative material, MX4926. MX4926 is a carbon fiber phenolic (CF/Ph) composite material manufactured by Solvay-Cytec. In this study, the carbon fiber used to make the CF/UHTR material is a PAN-based 8-harness fabric provided by Hexcel. The polymer matrix, UHTR, is a colorless semi-solid polysiloxane resin manufactured by Techneglas LLC. Raw materials are firstly made into CF/UHTR prepreg sheets through a hot-melt process and then compression molded into molding compound (MC) samples or two-dimensional (2D) laminates by a hot press. All samples for testing are post cured in a programmable oven at 350°C for 2 hours. The density of the fully-cured material is measured by the water displacement method. Thermal stability, flammability, and ablation properties of the material (in the format of MC) are characterized using thermogravimetric analysis (TGA), microscale combustion calorimeter (MCC), and oxyacetylene test bed (OTB) with three different heat fluxes. Mechanical properties of the material (in 2D laminates) are measured by a universal testing machine (UTM) to the ASTM standards. Testing results of the CF/UHTR material are compared with the commercial model ablative material, MX4926. Microstructures of the CF/UHTR material before and after mechanical and ablation tests are investigated and compared by an optical microscope and scanning electron microscopy (SEM) to further study the failure mode of the material.

Yttrium Silicate‐Coated Carbon Fiber Reinforced Phenolic Aerogel‐like Composites with Low Density and Low Ablation

Effects of Carbon Nanotubes and Carbon Fiber Reinforcements on Thermal Conductivity and Ablation Properties of Carbon/phenolic Composites

A novel ablative material for thermal protection system: Carbon fiber/polysiloxane composites

Preparation and ablation resistance of carbon fiber with yttrium silicate coating

Ceramicization mechanism and thermal insulation/ablative properties of hollow microspheres/boron phenolic composites

A facile in-situ strategy to fabricate lightweight carbon fiber/silicone-phenolic aerogel composites with superior toughness and ablation performance

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Thermal stability and anti-ablation performance of plasma spray coated-YSZ on Al 2 TiO 5 modified novel ablative carbon-phenolic composites

Anti-ablation properties of ZrB2 modified carbon/phenolic composites in plasma wind tunnel

Facile Synthesis and Properties of Highly Porous Quartz Fiber-Reinforced Phenolic Resin Composites with High Strength

A Novel Fused SiO2 and h-BN Modified Quartz Fiber/Benzoxazine Resin Ceramizable Composite with Excellent Flexural Strength and Ablation Resistance

Lightweight nitrogen‐doped phenolic composites with enhanced thermal ablation‐insulation performance by improving pyrolysis gas blocking effect

Enhanced mechanical, thermal and ablation properties of carbon fiber/BPR composites modified by mica synergistic MoSi2 at 1500 °C

Preparation of Phosphorus/Hollow Silica Microsphere Modified Polyacrylonitrile-Based Carbon Fiber Composites and Their Thermal Insulation and Flame Retardant Properties

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

3D needle-punched carbon/quartz fabric reinforced nanoporous phenolic composites with co-optimized mechanics, insulation and ablation

Thermal protection materials based on epoxy‐containing and phenyl‐containing polyhedral oligomeric silsesquioxane modified phenolic resin and phenolic resin/carbon fiber composites

Significantly Enhanced Mechanical, Thermal, and Ablative Properties of the Lightweight Carbon Fabric/Phenol-Formaldehyde Resin/Siloxane Aerogels Ternary Interpenetrating Network

Enhanced ablation resistance of carbon/phenolic composites based on mesophase pitch reinforced particles

2.5D quartz fabric reinforced nanoporous phenolic composites with weakened heat transfer and optimized mechanical properties

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB2/SiC