Abstract:Despite ongoing challenges, ablative thermal protection systems are among the most promising methods for safeguarding spacecraft during re-entry thermal protection systems (TPS). A novel aluminium titanate (Al2TiO5/AT) and a highly efficient thermal barrier of coating (TB/TBCs) made from yttria-stabilized zirconia (YSZ), powder, but deposited using the plasma spray technique on polyacrylonitrile (PAN)-based carbon fiber fabric(C)-reinforced with resorcinol phenol formaldehyde resin (RF) composites (C-RF)) would be a potential candidate for TPS applications. This study investigates the composites with varying wt.% of AT that were developed, namely 0 wt.% (YSZ-C-RF), 1 wt.%, 3 wt.%, and 5 wt.% (YSZ-AT-C-RF) by utilizing a hot press moulding machine. Thermal stability and ablation performance of unmodified C-RF with modified YSZ-C-RF and YSZ-AT-C-RF composites are examined through thermogravimetric analysis (TGA) and oxyacetylene torch test/OAT (4.0 MW/m2 for 60 sec). Also, the phase composition and microstructure of the ablated surface are determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The TBC of YSZ has an obvious influence on the residual weight ratios at high temperatures in C-RF and also plays a positive role in increasing thermal stability under nitrogen atmosphere for enhancing ablation resistance concerning YSZ-C-RF. The mass and linear ablation rates (MAR and LAR) of the composites after modifying the surface by YSZ-coated particles are reduced by 82.98% and 15.65%, respectively. Similarly, the introduction of AT particles and TBC of YSZ results in evidence of improving the thermal stability and the ablation resistance in varying wt.% of YSZ-AT-C-RF composites. The primary optimum AT weight loading for enhancing ablation resistance in YSZ-C-RF composites is 1wt.%. The modification of 1wt.% AT particles and YSZ-Coated particles reduce MAR and LAR by 54.79% and 61.94%, respectively. This work offers a meaningful method to remarkably enhance the ablation performance of the modified C-RF and YSZ-AT-C-RF composites.

Anti-ablation properties of ZrB2 modified carbon/phenolic composites in plasma wind tunnel

Improved Ablation Resistance of Carbon–phenolic Composites by Introducing Zirconium Diboride Particles

Synthesis and Anti-ablation Properties of in Situ ZrC Modified Carbon/Carbon Composites

Ablation Performance and Insulation Property of Carbon/Pheonlic Composites with ZrB2 Particles

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB<sub>2</sub>/SiC

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB2/SiC

The effects of ZrSi 2 on the ablation and insulation performances of low-density carbon-phenolic composites

Oxidation and ablation behaviours of ZrC modified carbon/carbon composites

The effects of zirconium diboride particles on the ablation performance of carbon-phenolic composites under an oxyacetylene flame

Effect of ZrB2 on the Ablation Behavior of Cf/ZrB2-ZrC-SiC Sharp Leading Edge Composites by PIP and RMI

Preparation and ablation properties of ZrB 2 –SiC protective laminae for carbon/carbon composites

Ablation Behaviour and Mechanical Performance of ZrB2-ZrC-SiC Modified Carbon/carbon Composites Prepared by Vacuum Infiltration Combined with Reactive Melt Infiltration

Ablation Property and Mechanism of ZrC-Cu-C/C Composites

Enhanced Anti-Ablation Performance of Carbon/carbon Composites Modified with ZrC-SiC

Zrc Ablation Protective Coating for Carbon/Carbon Composites

Mechanical Properties, Thermophysical Properties, and Long-Term Ablation Behaviours of C/C-ZrC- ZrB2- W-Cu Composites

High-temperature Erosion Resistance of ZrB2-based Ceramic Coating for Lightweight Carbon/carbon Composites under Simulated Atmospheric Re-Entry Conditions by High Frequency Plasma Wind Tunnel Test

Ablation behavior of high-entropy boride (Hf-Zr-Ta-Ti)B 2 coating fabricated via supersonic atmospheric plasma spraying for carbon/carbon composites

Lightweight and Multiscale ZrO2-SiOC Coated Carbon/phenolic Composites with Enhanced Oxidation and Ablation Resistance

Thermal stability and anti-ablation performance of plasma spray coated-YSZ on Al 2 TiO 5 modified novel ablative carbon-phenolic composites

Ablation Behavior of High-Entropy Boride (Hf-Zr-ta-ti)b2 Coating Fabricated Via Supersonic Atmospheric Plasma Spraying for Carbon/carbon Composites