Abstract:Fiber reinforced composite materials are widely used in the aerospace industry due to their high strength to weight ratio. One of their applications is as an ablative material placed at the outermost layer of a thermal protection systems (TPS). A TPS requires the ablative material to have low density, low thermal conductivity, high temperature resistance, formation of a stable and high shear strength char. This paper introduces a carbon fiber (CF) reinforced polysiloxane (UHTR) composite material processed and fabricated in a laboratory environment. The fabrication method of this material is illustrated in detail. Thermal, ablation, flammability, and mechanical properties of the CF/UHTR material are characterized and compared to a commercial model ablative material, MX4926. MX4926 is a carbon fiber phenolic (CF/Ph) composite material manufactured by Solvay-Cytec. In this study, the carbon fiber used to make the CF/UHTR material is a PAN-based 8-harness fabric provided by Hexcel. The polymer matrix, UHTR, is a colorless semi-solid polysiloxane resin manufactured by Techneglas LLC. Raw materials are firstly made into CF/UHTR prepreg sheets through a hot-melt process and then compression molded into molding compound (MC) samples or two-dimensional (2D) laminates by a hot press. All samples for testing are post cured in a programmable oven at 350°C for 2 hours. The density of the fully-cured material is measured by the water displacement method. Thermal stability, flammability, and ablation properties of the material (in the format of MC) are characterized using thermogravimetric analysis (TGA), microscale combustion calorimeter (MCC), and oxyacetylene test bed (OTB) with three different heat fluxes. Mechanical properties of the material (in 2D laminates) are measured by a universal testing machine (UTM) to the ASTM standards. Testing results of the CF/UHTR material are compared with the commercial model ablative material, MX4926. Microstructures of the CF/UHTR material before and after mechanical and ablation tests are investigated and compared by an optical microscope and scanning electron microscopy (SEM) to further study the failure mode of the material.

ZrO 2 -reinforced polymer-matrix composites used for thermal protection systems of ultra-high temperature aerospace propulsion

Anti-ablation properties of ZrB2 modified carbon/phenolic composites in plasma wind tunnel

Engineering Cf /ZrB2 -SiC-Y2 O3 for Thermal Structures of Hypersonic Vehicles with Excellent Long-Term Ultrahigh Temperature Ablation Resistance

Effect of K2ZrF6 concentration on thermal ablation resistance of ZrO2/TiO2 composite ceramic coatings on TC4 alloy

Elevated temperature ablation resistance and thermophysical properties of tungsten matrix composites reinforced with ZrC particles

Novel Gradient ZrB2–MoSi2–SiC Dense Layer with Enhanced Emissivity and Long-Term Oxidation Resistance at Ultra-High Temperatures

Thermal stability and anti-ablation performance of plasma spray coated-YSZ on Al 2 TiO 5 modified novel ablative carbon-phenolic composites

Ablation and Mechanical Properties of ZrC-reinforced PBI Resin Matrix Composites

Carbon fiber reinforced ZrC based ultra-high temperature ceramic matrix composite subjected to laser ablation: Ablation resistance, microstructure and damage mechanism

Formation of high heat resistant coatings by using gas tunnel type plasma spraying

Microstructure and ablation behaviour of C/C-SiC-ZrC-Cu composites prepared by reactive melt infiltration

High Toughness and CMAS Resistance of REAlO3/RE2Zr2O7 (RE = La, Nd, Sm, Eu, Gd, and Dy) Composites with Eutectic Composition for Thermal Barrier Coatings

Ablation Behavior of a Carbon Fabric Reinforced Phenolic Composite Modified by Surface-Decorated ZrB2/SiC

Significantly improved ablation properties under high heat flux environment based on carbon fiber reinforced Zr-doped silicone rubber

Oxidation resistance, ablation resistance and in situ ceramization mechanism of Al-coated carbon fiber/boron phenolic resin ceramizable composites modified with Ti3SiC2

Enhanced ablation resistance of ZrC–ZrO2 nanocomposite ceramic coating on TiAlNb medium-entropy alloy prepared by a novel strategy

A universal strategy towards the fabrication of ultra-high temperature ceramic matrix composites with outstanding mechanical properties and ablation resistance

Mechanical Property, Oxidation and Ablation Resistance of C/C–ZrB2–ZrC–SiC Composite Fabricated by Polymer Infiltration and Pyrolysis with Preform of Cf/ZrB2

The Thermal Stability, Ablation Properties, Creamization Mechanism of Graphite/Zirconia (ZrO2)/Silicone Rubber Composites Containing Carbon Multicomponent Systems

Enhanced high temperature ablation resistance of dense ZrB2–Al2TiO5 composite coating by very low-pressure plasma spraying

A novel ablative material for thermal protection system: Carbon fiber/polysiloxane composites