Abstract:Thermoplastic elastomers are a green and sustainable category of high performance polymers and show the great advantage of easy processability relative to conventional rubbers. In this work, a fluorine-containing thermoplastic elastomer was prepared through dynamic crosslinking of poly(vinylidene fluoride)/poly(ethylene-methyl acrylate-glycidyl methacrylate) (PVDF/EGMA) blends with the aid of amino-terminated crosslinker (KH602). The reaction kinetics of EGMA with KH602 were evaluated by the DSC Kissinger methodwith an activation energy (E-a) of 103.04 kJ mol(-1). The increased 'S-type' torque curve during dynamic crosslinking indicates the occurrence of chemical crosslinking while Fourier transform infrared spectra further demonstrate the dehydrofluorination of PVDF and the reaction between the amino group of KH602 and the epoxy group in EGMA. The prepared PVDF/ EGMA (30/70) thermoplastic vulcanizate shows good reprocessability, mechanical robustness and elasticity. With increasing content of crosslinker, the stress at 300% increases from 2.3 MPa to 3.5 MPa while elongation at break decreases from 1150% to 380%. The PVDF/EGMAblend has a typical `sea-island'morphologywith ca 7 mu m dispersed phasewhile PVDF/EGMA thermoplastic vulcanizates have gradually elongated disperse phases due to improved interfacialmiscibility as evidenced by quantitative nano-mechanical mapping AFM modulus analysis. Therefore, dynamic vulcanization is an effective and economical approach to integrate thermoplasticity and rubber elasticity into plastic/rubber pairs with good phase miscibility. (C) 2023 Society of Industrial Chemistry.

Advanced in Polysiloxane-Based Thermoplastic Dynamic Vulcanizate by Reactive Extrusion

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

State-of-the-art and research progress of polyolefin-based elastomer

Novel Thermoplastic Vulcanizates Prepared by Dynamic Vulcanization: Undergraduate Experiments for Polymers

Preparation, microstructure, and microstructure-properties relationship of thermoplastic vulcanizates (TPVs): A review

Preparation, Properties and Application of Dynamic Vulcanizated Blends

PP/EPDM-based Dynamically Vulcanized Thermoplastic Olefin with Zinc Dimethacrylate: Preparation, Rheology, Morphology, Crystallization and Mechanical Properties

Economical Preparation of Fluorine-Containing Thermoplastic Elastomer with Good Phase Miscibility and Elasticity Based on Dynamic Vulcanization

Preparation and properties of a novel poly(lactic-acid)-based thermoplastic vulcanizate from both experiments and simulations

Vulcanization of polypropylene

Microstructure and Properties of Solvent-Resistant Fluorine-Contained Thermoplastic Vulcanizates Prepared Through Dynamic Vulcanization

Supertoughened Poly(Lactic Acid)/Polyurethane Blend Material by in Situ Reactive Interfacial Compatibilization Via Dynamic Vulcanization

Preparation of Functionalized Diene-Elastomers Upon Top-Down Pyrolysis of Their Vulcanizates Via Dynamic Covalent Polymerization

Preparation of high-performance polyethylene via a novel processing method of combining dynamic vulcanization with a silane-grafted water-crosslinking technique

Skeletal Network Enabling New-Generation Thermoplastic Vulcanizates

Dynamic siloxane materials: From molecular engineering to emerging applications

Structure and Properties of Dynamically Cured Thermoplastic Vulcanizate Based on Poly(vinylidene Fluoride), Silicone Rubber, and Fluororubber

Super-tough poly(lactic acid)/silicone rubber thermoplastic vulcanizates: The organic and inorganic synergistic interfacial compatibilization

Preparation and Properties of Dynamically Cured Poly(vinylidene Fluoride)/silicone Rubber Blends

Mechanical and Morphological Perspectives on PLA‐Based Thermoplastic Vulcanizates (TPVs): A Brief Review

Enhanced Rubber–Plastic Compatibility for Novel Multifunctional Thermoplastic Vulcanized Rubber