Abstract:Novel super toughened bioplastics are developed through controlled reactive extrusion processing, using a very low content of modifier, truly a new discovery in the biodegradable plastics area. The super toughened polylactide (PLA) blend showing a notched impact strength of ∼1000 J/m with hinge break behavior is achieved at a designed blending ratio of PLA, poly(butylene succinate) (PBS), and poly(butylene adipate-<i>co</i>-terephthalate) (PBAT), using less than 0.5 phr peroxide modifier. The impact strength of the resulting blend is approximately 10 times that of the blend with the same composition without a modifier and ∼3000% more than that of pure PLA. Interfacial compatibilization among the three biodegradable plastics took place during the melt extrusion process in the presence of a controlled amount of initiator, which is confirmed by scanning electron microscopy and rheology analysis. The synergistic effect of strong interfacial adhesion among the three blending components, the decreased particle size of the most toughened component, PBAT, to ∼200 nm, and its uniform distribution in the blend morphology result in the super tough biobased material. One of the key fundamental findings through the in situ rheology study depicts that the radical reaction initiated by peroxide occurs mainly between PBS and PBAT and not with PLA. Thus, the cross-linking degree can be controlled by adjusting renewable sourced PLA contents in the ternary blend during reactive extrusion processing. The newly engineered super toughened PLA with high stiffness and high melt elasticity modulus could reasonably serve as a promising alternative to traditional petroleum plastics, where high biobased content and biodegradability are required in diverse sustainable packaging uses.

Fully biobased and supertough polylactide-based thermoplastic vulcanizates fabricated by peroxide-induced dynamic vulcanization and interfacial compatibilization

Super-tough Poly(lactide) Thermoplastic Vulcanizates Based on Modified Natural Rubber

Super-Tough Poly(lactic Acid)-Based Thermoplastic Vulcanizate Based on Selective Dispersion and in Situ Compatibilization of Commercial Reinforcing Fillers and Its Application in Three-Dimensional Printing

A super-toughened poly(lactic acid)-based thermoplastic vulcanizate through incorporating modified SiO2 nanoparticles

Novel Biobased Thermoplastic Elastomer Consisting of Synthetic Polyester Elastomer and Polylactide by in Situ Dynamical Crosslinking Method

A super-toughened poly(lactic acid)-based thermoplastic vulcanizate through incorporating modified SiO<sub>2</sub> nanoparticles

Super-tough Polylactic Acid Blends Via Tunable Dynamic Vulcanization of Biobased Polyurethanes

Super-tough poly(lactic acid)/silicone rubber thermoplastic vulcanizates: The organic and inorganic synergistic interfacial compatibilization

Supertough poly(lactic acid)/bio-polyurethane blends fabricated by dynamic self-vulcanization of dual difunctional monomers

Biobased Poly(lactide)/ethylene-co-vinyl Acetate Thermoplastic Vulcanizates: Morphology Evolution, Superior Properties, and Partial Degradability

Shape memory polylactic acid/modified Eucommia ulmoides gum thermoplastic vulcanizates based on excellent interfacial adhesion and co‐continuous structure

A New Strategy for the Preparation of Fully Biobased and Biodegradable Polylactic Acid with Both High Rigidity and Flexibility

Super-tough polylactic acid blends via tunable dynamic vulcanization of polyurethanes with ultrahigh bio-based content

Design of biodegradable PLA/PBAT blends with balanced toughness and strength via interfacial compatibilization and dynamic vulcanization

Largely toughened poly(lactic acid) fabricated by melt blending with thermoplastic polyurethane through interfacial compatibilization induced by simultaneous addition of hydrophobic silica nanoparticles and in situ cross‐linking reaction

Preparation and Properties of Novel Thermoplastic Vulcanizate Based on Bio-Based Polyester/Polylactic Acid, and Its Application in 3D Printing

The effect of dynamic vulcanization on the morphology and biodegradability of super toughened poly(lactic acid)/unsaturated poly(ether-ester) blends

Preparation and properties of a novel poly(lactic-acid)-based thermoplastic vulcanizate from both experiments and simulations

Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility

Preparation of biodegradable PLA/PBAT blends with balanced toughness and strength by dynamic vulcanization process