Abstract:The conversion of plastic waste to high value-added aromatics such as benzene, toluene, ethylbenzene, xylene (BTEX) through catalytic pyrolysis offers huge untapped opportunities for resource recovery and plastic pollution control. Economical equipment configuration, operation and maintenance, high safety factor, high efficiency, stability, low-cost catalyst synthesis design, high yield, high selectivity of products are the key to the practical application of catalytic pyrolysis. In present study, low-cost kieselguhr based ZSM-5 was synthesized by one-pot in situ hydrothermal method using kieselguhr as silicon-aluminum source. During the depolymerization-recrystallization process, the selective growth and self-assembly of crystals on the a, c axis formed large-grain of ZSM-5 with extended straight channels and maximized sinusoidal channels. Native transition and alkaline-earth metals were coordinated to the acidic sites of the silica-aluminum skeleton, achieving tunability of the catalyst acidity. Catalytic pyrolysis of mask waste at 550 °C in a fixed bed reactor achieved the highest pyrolysis oil yield (44.3 wt%) and BTEX selectivity (77.1 %) with p -xylene as the dominant xylene product (78.2 %). After 3 cycles of long-life experiments, the BTEX selectivity of the catalyst remained at 65.1 %, which is higher than that of commercial ZSM-5 (54.9 %), indicating the superior use stability. Molecular dynamics simulations showed that the excellent shape-selectivity of the catalyst is based on its unique pore structure, which facilitates the diffusion and transport of appropriately sized intermediates/products within the structure, resulting in products with advantageous distributions. This study proposes an efficient and feasible plastic closed-loop strategy for green upgrading of medical waste to high value-added chemicals.

Fast pyrolysis of silicones at low temperatures catalyzed by anatase titanium dioxide

Synthesis and Physicochemical Characterization of Hierarchical ZSM-5: Effect of Organosilanes on the Catalyst Properties and Performance in the Catalytic Fast Pyrolysis of Biomass

An Improved Phase-Inversion Process for the Preparation of Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres: Synthesis and Application in the Field of Polyolefin Catalysis

Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons As a Process Byproduct

From Automotive Shredder Residue to Nano-Ceramics and Graphitic Carbon—thermal Degradation Kinetics

Epoxidation of Propylene with Dilute H 2 O 2 over Titanium Silicalite Containing Trace Aluminum

Recycling of Silicone Rubber from Composite Insulator with Pyrolysis Method

A robust depolymerization route for polysiloxanes

Dimethylsilanone generation from pyrolysis of polysiloxanes filled with nanosized silica and ceria/silica

On the Biocatalytic Synthesis of Silicone Polymers

Assessing pyrolysis behavior of silicon-containing arylacetylene resin via experiments and ReaxFF MD simulations

A structured catalyst of ZSM-5/SiC foam for chemical recycling of waste plastics via catalytic pyrolysis

Microwave-assisted pyrolysis of waste cooking oil for bio-based hydrocarbons over Chem-CaO@SiC catalyst

Synthesis of Low Cost Titanium Silicalite-1 Zeolite for Highly Efficient Propylene Epoxidation

One-pot synthesis of titanium isophthalate and highly active catalytic glycolysis of waste PET

Pyrolysis characteristics and kinetics of waste photovoltaic module: A TG-MS-FTIR study

A hybrid sol–gel synthesis of mesostructured SiC with tunable porosity and its application as a support for propane oxidative dehydrogenation.

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Ti-Si composite glycol salts: depolymerization and repolymerization studies of PET

Synthesis and properties of thermoplastic and dissolvable polysiloxanes containing polyhedral oligomeric silsesquioxane

Synthesis of High-Performanced Titanium Silicalite-1 Zeolite at Very Low Usage of Tetrapropyl Ammonium Hydroxide