Abstract:The emerging application of solar power plants has led to serious waste photovoltaic module disposal problems. To address the environmental concerns associated with waste photovoltaic module disposal, this study investigates pyrolysis as a promising treatment technology and a fundamental step for various thermal chemical processes. The kinetic characteristics and pyrolysis products of ethylene vinyl acetate (EVA), Tedlar-Polyethylene Terephalate-Tedlar (TPT), and silica gel were studied using TG-FTIR-MS. The weight loss stages of EVA, TPT, and silica gel were between 300 and 510 °C, 330–520 °C, and 100–830 °C, respectively, with a total weight loss rate of 99–100%, 73–76%, and 60–62%. The reactions they experienced were acetic acid production and long chain fracture, long chain fracture and fluorocarbon compound production, polymer methyl vibration, [(CH 3 ) 2 SiO] cyclic compound production, Si–C bond fracture, and CO 2 production, respectively. According to the results of the two kinetic models, their average activation energies were 278-281 kJ/mol, 330-336 kJ/mol, and 187-193 kJ/mol. The products released during the pyrolysis process of the three samples were different. Among them, olefins and aromatic hydrocarbons from EVA and TPT could be used to synthesize high-molecular-weight substances. Aldehydes, fats, and esters from TPT could be used to synthesize drugs and daily necessities; hydrofluoric acid and furan were harmful to human health and the environment. Hexamethylcyclotrisiloxane and octamethylcyclotetrasiloxane from silica gel could be used to synthesize silicone polymers. The content of volatile substances during pyrolysis was related to the heating rate. The findings are expected to contribute to the development of waste photovoltaic module disposal and resource recovery through pyrolysis.

Recycling of Silicone Rubber from Composite Insulator with Pyrolysis Method

Monomer Recovery and Nano-Silica Separation From Biodegraded Waste Silicone Rubber Shed of Composite Insulator

Fast pyrolysis of silicones at low temperatures catalyzed by anatase titanium dioxide

An environmentally-friendly permeable liquid salt pyrolysis method based on capillary heat transfer for recycling waste insulator materials

Improving the Tracking and Erosion Resistance of Silicone Rubber Using Fe2O3 and Platinum Catalyst

Pyrolysis-based separation mechanism for waste crystalline silicon photovoltaic modules by a two-stage heating treatment

Effect of Silicone Rubber of a Waste Composite Insulator on Cement Mortar Properties

Pyrolysis characteristics and kinetics of waste photovoltaic module: A TG-MS-FTIR study

From Automotive Shredder Residue to Nano-Ceramics and Graphitic Carbon—thermal Degradation Kinetics

Efficient and Sustainable Strategy for Recycling of Carbon Fiber-Reinforced Thermoset Composite Waste at Ambient Pressure

Studies on Recycling Silane Controllable Recovered Carbon Fiber from Waste CFRP

Catalytic upcycling of silicone rubber by AlCl 3 at low temperature

Research on the Recycling of EP/Al2O3 and Its Insulation Performance after Reconstitution

Fabricating superior thermal conductivity SiC–AlN composites from photovoltaic silicon waste

Maintaining electromagnetic interference shielding and flame-retardant performance of recycled carbon fiber-reinforced composites under multiple pyrolysis recycles

Finite Element Simulation on the Thermal Degradation of Silicone Rubber of Composite Insulator

Efficient thermo-oxidative reclamation of green tire rubber and silanized-silica/rubber interface characterization

Dielectric Response of Silicone Rubber Composites for Outdoor Insulation at Elevated Temperatures

Pyrolysis Characteristics and Stage Division of Red Mud Waste from the Alumina Refining Process for Cyclic Utilization

A Pyrolysis Heating Rate Based Pressureless Method for Preparing Dense and Crack-Free Polymer-Derived Silicon Oxycarbide Bulk Ceramics

Microwave‐assisted Alcoholysis of Silicone Rubber Waste with Geraniol for Effective Elastomer Damping