Abstract:The recycling of industrial wastes instead of their burial disposing is necessary for maintaining the environment. In the current research, aluminum dross waste was utilized for preparing sintered Al/Al2O3 hybrid composites reinforced with different amounts of SiC and graphene up to 8 and 4 wt %, respectively. To obtain nanocomposite powders, aluminum dross and reinforcing materials were milled by high energy ball milling for 10 h. The particles' shapes and sizes of prepared nano powder were characterized by transmission electron microscope while the phase composition, crystallite size, lattice strain and dislocation density were investigated by X-ray diffraction technique. To fabricate sintered hybrid composites, the prepared nano powders were pressed and sintered at 1000 and 1200 °C. The physical properties in-terms of bulk density and apparent porosity of sintered composites were determined by liquid-displacement technique. The microstructure and phase composition were examined by scanning electron microscopy and X-ray technique, respectively. Furthermore, compressive strength, microhardness, wear resistance and dielectric properties were investigated in details. Also, pulse-echo technique was used to determine the elastic moduli. The results showed that the particle size of milled aluminum dross (Al/Al2O3) powder which contains 8 wt% SiC and 4 wt% graphene is 43.8 nm while its crystal size is equal 19.2 nm. Generally, all physical, mechanical and electrical properties were improved after increasing the sintering temperature from 1000 to 1200 °C and the reinforcement amounts. When this batch sintered at 1200 °C, the microhardness, compressive strength and elastic moduli increased by about 142.5, 44.8 and 46% while the wear rate was reduced by about 27% as compared to the composite that contain zero SiC and graphene. The increasing of SiC and graphene in Al/Al2O3 composites as well as sintering temperature led to positive effect on AC conductivity (σac), dielectric constant and dielectric loss.

Fabricating superior thermal conductivity SiC–AlN composites from photovoltaic silicon waste

Enhanced Field-Dependent Conductivity and Material Properties of Nano-Aln/micro-sic/silicone Elastomer Hybrid Composites for Electric Stress Mitigation in High-Voltage Power Modules

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Fabrication of Si2N2O Ceramic with Silicon Kerf Waste As Raw Material

In situ formation of Si3N4–SiC nanocomposites through polymer-derived SiAlCN ceramics and spark plasma sintering

Self-assembling of versatile Si3N4@SiO2 nanofibre sponges by direct nitridation of photovoltaic silicon waste

Fabrication of Al/Al2O3/ SiC/graphene hybrid nanocomposites from Al-dross by powder metallurgy: Sinterability, mechanical and electrical properties

Green synthesis of porous SiC ceramics using silicon kerf waste in different sintering atmospheres and pore structure optimization

Preparation of Al-Si alloy from silicon cutting waste: Enabling oxide surface removing and silicon utilization improving via vacuum sintering

High-performance Si/nano-Cu/CNTs/C anode derived from photovoltaic silicon waste: A potential photovoltaic-energy storage strategy

Improving thermal conductivity of Al/SiC composites by post-oxidization of reaction-bonded silicon carbide preforms

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

Microwave Sintering Rapid Synthesis of Nano/Micron β-SiC from Waste Lithium Battery Graphite and Photovoltaic Silicon to Achieve Carbon Reduction

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Synthesis of Si/C Composites by Silicon Waste Recycling and Carbon Coating for High-Capacity Lithium-Ion Storage

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

Efficient Preparation of Si3N4 by Microwave Treatment of Solar-Grade Waste Silicon Powder

Recycling of photovoltaic silicon waste for high-performance porous silicon/silver/carbon/graphite anode

Novel application of high temperature solution growth method in simultaneously preparing SiC/Ti 3 SiC 2 /TiC using photovoltaic Si waste and Ti-bearing blast furnace slag

Low‐temperature and pressureless in‐situ self‐assembled SiC w / SiC composite ceramics for solar thermal absorber and storage integration

Construction of P-Sinps/Ag@C Composites by Silver-Assisted Etching Residual Silicon Waste Toward Anode Material for Lithium-Ion Battery