Abstract:To address the various shortcomings of a high material cost, energy-intensive temperature conditions and ultra-low efficiency of the conventional boro/carbothermal reduction method for the industrial preparation of ZrB2-SiC powders, a novel molten-salt and microwave-modified boro/carbothermal reduction method (MSM-BCTR) was developed to synthesize ZrB2-SiC powders. As a result, phase pure ZrB2-SiC powders can be obtained by firing low-cost zircon (ZrSiO4), amorphous carbon (C), and boron carbide (B4C) at a reduced temperature of 1200 degrees C for only 20 min. Such processing conditions are remarkably milder than not only that required for conventional boro/carbothermal reduction method to prepare phase pure ZrB2 or ZrB2-SiC powders (firing temperature of above 1500 degrees C and dwelling time of at least several hours), but also that even with costly active metals (e.g., Mg and Al). More importantly, the as-obtained ZrB2 particles had a single crystalline nature and well-defined plate-like morphology, which is believed to be favorable for enhancing the mechanical properties, especially toughness of their bulk counterpart. The achievement of a highly-efficient preparation of such high-quality ZrB2-SiC powders at a reduced temperature should be mainly attributed to the specific molten-salt and microwave-modified boro/carbothermal reduction method.

Synthesis of ZrC hollow nanospheres at low temperature

Uniform and spherical ZrC nanoparticles derived from metal organic frameworks by one-step thermal decomposition

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Nano-sized Amorphous Cu–Zr Alloy Particles Prepared by Mechanochemical Reaction

The co-reduction route to TiC nanocrystallites at low temperature

A Simple Route to Prepare Nanocrystalline Titanium Carbonitride

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Low-temperature, template-free synthesis of wurtzite ZnS nanostructures with hierarchical architectures

A Benzene-Thermal Synthetic Route to Nanocrystalline Zrn

Low temperature synthesis of NaSICON NaZr2(PO4)3 powders with the assistance of in situ formed mineralizer

Synthesis of porous ZrC particles derived from MOF-801

Synthesis of nanocrystalline silicon carbide powders

Synthesis and Characterization of ZrS3 Nanocrystallites

Highly Efficient and Low-Temperature Preparation of Plate-Like ZrB₂-SiC Powders by a Molten-Salt and Microwave-Modified Boro/Carbothermal Reduction Method.

Synthesis and Pyrolysis Evolution of Glucose-Derived Hydrothermal Precursor for Nanosized Zirconium Carbide

Preparation and Microstructure of Nanometer Tetragonal Polycrystal Zirconia Powder at Low Temperature Condition

A simple and novel route for the preparation of ZnO nanorods

Fabrication And Characterization Of Zro2 Hollow Spheres

A general low-temperature CVD synthetic route to fabricate low-melting-point-metal compounds 1D nanostructures