Abstract:Reactive ion etching (RIE) using fluorinated gases, such as admixtures of CF4 with O2, has been conducted on sputter deposited films of SiC. For comparison purposes, the same experiments with SiO2 films and Si wafers have been conducted. The influence of rf power, pressure, and O2 concentration on etch rate in CF4+O2, SF6+He, and Ar gases has been investigated. RIE mechanisms were studied using in situ monitoring of excited fluorine emission intensity and dc self-bias at the lower electrode. Typical etch rates of Si, SiO2, and SiC are 1220, 600, and 375 Å/min in CF4+4% O2; 8850, 500, and 560 Å/min in SF6+50% He; and 340, 280, and 270 Å/min in Ar, respectively, at P=200 W, p=20 mTorr, and 300 K. Under these conditions the dc self-bias levels are −396 V for CF4+4% O2, −350 V for SF6+50% He, and −414 V for Ar. In both CF4+4% O2 and SF6+50% He, the etch rates of Si, SiO2, and SiC all increase monotonically with the rf power. However, with increasing pressure the Si etch rate increases while the etch rates of SiO2 and SiC decrease. Since the dc self-bias varies proportionally with power and inversely with pressure, it is clear that the etching of Si is chemical reaction rate controlled. On the other hand, the etch rate of SiC depends on the ion bombardment energy and is thus dominantly controlled by a physical reaction. The SiC etch rate exhibits a weak dependence on O2 concentration in CF4+O2 mixtures. The dc self-bias is not affected by increasing O2 concentration, but the SiC etch rate is slightly enhanced. This suggests that a certain etching inhibitor layer exists on the surface of SiC, which can weakly react with the O2 plasma. Auger electron spectroscopy data indicates that this layer consists of carbon atoms.

Characteristics of Several Common Optical Materials in Ion Beam Etching

Reactive ion beam etching for diffractive optical elements

Transmission of refractive microlens array by reactive ion beam etching

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Optical and Mechanical Properties and Microstructures of Nb2O5, Ta2O5 and SiO2 Thin Films Prepared by Ion Beam Sputtering

Fabrication of Slanted Grating Utilizing Reaction Ion Beam Etching: The Role of CHF<inf>3</inf> and O<inf>2</inf> Etching Atmosphere

A Parametric Study of ICP-RIE Etching on a Lithium Niobate Substrate

Etching Quartz with Inductively Coupled Plasma Etching Equipment

Surface quality and microstructure evolution in fused silica under SF 6 /Ar reactive ion beam etching

Etching of glass, silicon, and silicon dioxide using negative ionic liquid ion sources

Investigation on Etch Performance of Focused Ion Beam

Ion beam lithography with gold and silicon ions

Atomic Depth Image Transfer of Large-Area Optical Quartz Materials Based on Pulsed Ion Beam

Effect of ion beam etching on surface/subsurface structural defect evolution in fused silica optics

Morphology evolution of fused silica surface during ion beam figuring of high-slope optical components

A process study of electron beam nano-lithography and deep etching with an ICP system

Optical characterization and laser damage of fused silica optics after ion beam sputtering

Reactive ion etching of SiC thin films using fluorinated gases

Reactive ion etching of plasma enhanced chemical vapor deposition amorphous silicon and silicon nitride: Feeding gas effects

Inductively coupled plasma-reactive ion etching of InSb using CH[sub 4]∕H[sub 2]∕Ar plasma

Study on the Effects of Ion Beam Etching on Polished Surface of CLBO Crystal