Abstract:The J-integral solutions for cracked pipes are important in crack growth calculation and failure evaluation based on the elastic-plastic fracture mechanics. One of the most important crack types in structural integrity assessment for nuclear piping systems is circumferential semi-elliptical surface crack on the inside of the pipes. Although several J-integral solutions have been provided, no solutions were developed at both the deepest and the surface points of circumferential semi-elliptical surface cracks in pipes. In this study, with backgrounds described above, the J-integral solutions of circumferential semi-elliptical surface cracks on the inside of the pipe were developed by numerical finite element analyses. Three dimensional elastic-plastic analyses were performed considering different material properties, pipe sizes, crack dimensions and, especially, combined loading condition of internal pressure and bending moment which is a typical loading condition for nuclear piping systems. The J values at both the deepest and the surface points were extracted from finite element analysis results. Moreover, in order to benefit users in practical applications, a pair of convenient J-integral estimation equations were developed based on the calculated J values at the deepest and the surface points. Finally, the accuracy and applicability of the convenient equations were confirmed by comparing with the provided stress intensity factor solutions in elastic region and with finite element analysis results in elastic-plastic region.

An approximative solution for limit load of piping branch junctions with circumferential crack and finite element validation

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

1003 Experimental Study on Limit Load Criterion for Pipe with Crack Modelled in Its Shape

Limit analysis of equal-diameter piping branch junctions with local wall-thinning under internal pressure

Application Scope of Limit Load Criterion for Ductile Material Pipes with Circumferentially External Cracks

Limit Analysis for Piping Branch Junctions with Local Wall-Thinning under Pressure

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Limit Load Estimation Method for Pipe with an Arbitrary Shaped Circumferential Surface Flaw

Safety analysis of pressure piping containing incomplete penetration under combined loads

Experimental Verification on Limit Load Estimation Method for Pipes with an Arbitrary Shaped Circumferential Surface Flaw

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Prediction of Collapse Stress for Pipes with Arbitrary Multiple Circumferential Surface Flaws

Experimental Investigation on the Limit Load Estimation Method for Pipes Containing a Circumferential Surface Flaw with Complicated Shape

Review of limit load solutions of smooth pipe bends Part I: Defect-free bends

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

On the Limit Analysis of Defective Pipelines under Complex Loadings

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Stress Intensity Factor Solutions for Circumferential Surface Cracks with Large Aspect Ratios in Pipes Subjected to Global Bending

Development of J-Integral Solutions for Semi-Elliptical Circumferential Cracked Pipes Subjected to Internal Pressure and Bending Moment