Abstract:Elbows are the type of components widely used in a piping system, and are particularly important from the point of view of structural behaviour. In practice, the existence of cracks in excess of the defect limit cannot be excluded. So it is very important to know the effect of cracks on limit loads of elbows for integrity assessment of the piping system. The existing closed-form limit loads for axial cracked elbows under in-plane bending moment are either too conservative or inadequate, therefore, the present studies focused on limit loads of elbows with axial cracks and the crack configurations were assumed to be constant-depth rectangle, subjected to in plane opening and closing bending moments respectively. The crack-like defects were postulated to be in crown of elbows with different crack sizes. The limit loads and residual strength factors (RSFs) (ML/M0L )of cracked elbows with various ratios of t/rm and relative bending radius R/rm were investigated in detail, by using of three-dimensional (3D) non-linear finite element (FE) analyses, assuming elastic perfectly-plastic material behaviour and taking geometric nonlinearity into account. The non-linear finite element (FE) analyses indicate that under the open/close bending modes, elbows exhibit different behaviour obviously at the elastic plastic states. The results from comprehensive parametric studies indicate that the limit loads of cracked elbows may reduce with the increasing of crack length, and these trends are more serious for long radius elbows. Generally speaking, the thickness-radius ratio t/rm of elbow has insignificant effects on RSFs. Based on extensive limit load numeric data and comprehensive parametric studies, the revised closed form equations for cracked elbows involving effect of tangent pipes, were established. The results can be used for Fitness-For-Service assessment of elbow.

Review of limit load solutions of smooth pipe bends Part I: Defect-free bends

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

An approximative solution for limit load of piping branch junctions with circumferential crack and finite element validation

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Limit Loads for Cracked Elbows under In-Plane Bending Moment

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Finite element analysis of the limit load of pipe bend with local wall-thinning defect under complex loads

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

1003 Experimental Study on Limit Load Criterion for Pipe with Crack Modelled in Its Shape

Shakedown and limit analysis of 90° pipe bends under internal pressure, cyclic in-plane bending and cyclic thermal loading

Experimental Verification on Limit Load Estimation Method for Pipes with an Arbitrary Shaped Circumferential Surface Flaw

Application Scope of Limit Load Criterion for Ductile Material Pipes with Circumferentially External Cracks

Limit loads for part-through surface axially cracked elbows under internal pressure

Analytical Limit Loads for Tube Sections with Circumferential Degradation

Failure Bending Stresses for Small Diameter Thick-Wall Pipes

Shakedown, Ratchet, and Limit Analyses of 90° Back-to-back Pipe Bends under Cyclic In-Plane Opening Bending and Steady Internal Pressure

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Collapse Loads for Circumferentially Through-Wall Cracked Pipes Subjected to Combined Torsion and Bending Moments

Finite Element-Based Limit Load of Piping Branch Junctions under Combined Loadings

Failure Bending Moment for Pipes with an Arbitrary-Shaped Circumferential Flaw