Abstract:High Pressure Die Casting (HPDC) is a manufacturing process producing complex and precise products by injecting molten material into mold cavity at top speed and pressure. The quality of product is highly related with mold cavity design. Casting defects due to inappropriate mold design will affect mechanical properties, surface quality and product life cycle. Optimization of runner system is essential to manufacture complex and precision product design with minimal defects. The combination of runner and gating system is investigated in this paper. This paper investigated the effect of runner and gating optimization in reducing the gas porosity inside casting by evaluating the fluid and thermal distribution behavior in experimental and Computational Fluid Dynamic (CFD). The gas porosity generated in the molten magnesium alloy is due to the turbulent flow and the inconsistency of the fluid flow to push the gas bubble away from the main casting. This paper includes an X-ray of a sample product that shows correlation between gas porosity and CFD results. Results show that localize porosity gathered at the bottom of the main casting. Based on localized porosity position, runner and gating system is modified and numerical simulation is carried out for analysis. An inspection instrument step-type test piece is taken as an investigation sample to illustrate the technique of design modifications and improvements. Process parameters considered in this paper are injection speed, injection pressure, melt temperature and mold temperature. This paper proposed new runner designs that can generate balanced velocity and temperature distribution inside mold cavity, improving the solidification process aimed for reducing casting defects.

Influence of the Velocity and Start Position of High-Speed Injection Stage on the Quality of Magnesium Alloy Die Casting

Influences of Casting Pressure Conditions on the Quality and Properties of a Magnesium Cylinder Head Cover Die Casting

Study on Pressure Variations in the Mold of Magnesium Alloy Die Castings

Study on the Influence of Injection Velocity on the Evolution of Hole Defects in Die-Cast Aluminum Alloy

Analysis of Fractures and Microstructures on Different Injection Speeds in High-Pressure Die-Casting Magnesium Alloy

Influence of Decreasing Speed Technology and Decreasing Pressure Technology on Quality and Properties of Magnesium Alloy Die Castings

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Processing Technology and Mechanical Properties of Die-Cast Magnesium Alloy AZ91D

Numerical simulation of die casting process of magnesium alloy

Investigation of Properties in Magnesium Alloy Thin Plates after Die Casting Processes

The Effect of Slow Shot Speed and Casting Pressure on the 3D Microstructure of High Pressure Die Casting AE44 Magnesium Alloy

Experimental study of squeeze casting of ZK60 magnesium alloy

Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy

Research of Die-Casting Process of ZA85 Magnesium Alloys

Vacuum Assisted High-Pressure Die Casting of AZ91D Magnesium Alloy at Different Slow Shot Speeds

Fast shot speed induced microstructure and mechanical property evolution of high pressure die casting Mg-Al-Zn-RE alloys

Effects of Process Parameters on Morphology and Distribution of Externally Solidified Crystals in Microstructure of Magnesium Alloy Die Castings

Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-Casted Test Piece

Numerical simulation of die casting and vacuum die casting for magnesium alloy AZ91D

Effects Of Slow, Shot Speed Of Sss Die Casting On Microstructure And Mechanical Properties Of Aluminum Alloys Adc12