Abstract:WC-Co cemented carbides are widely used in the fields of military, aerospace, mining and cutting industry etc. In this paper, a new two-step method for the preparation of WC-Co cemented carbides was proposed. First, the mixture of yellow tungsten trioxide (WO3) and cobaltic oxide (Co2O3) were reduced by carbon black to remove all the oxygen. Then, the carbothermic reduction products were precisely mixed with an appropriate amount of carbon black to directly prepare WC-Co cemented carbides. The effects of C/WO3 ratio on the phase composition, morphological evolution, particle size and mechanical properties of products are investigated. The experimental results revealed that when the C/WO3 molar ratio was above 2.7, all oxygen in the raw material mixture were removed by carbon black and a mixture of W2C and η-phase were obtained after the first step of carbothermic reduction at 1150 °C for 2 h; then, the mixture of carbothermic reduction product and an appropriate content of carbon black was compacted, and the green compact was first carbonized at 1200 °C for 2 h and then sintered at 1450 °C for 4 h to prepare cemented carbides. With the increase of C/WO3 ratio at the first stage, the content of η-phase with a low melting point increased, which resulted in the large grain size of WC in the finally prepared cemented carbide. Compared with the traditional method of preparing cemented carbides, the cemented carbides prepared by the current method showed a higher hardness and toughness. Furthermore, the addition of a proper content of the VC in the second stage can significantly inhibit the grain growth of WC and further increase the hardness of cemented carbides.

Latest researches preparation of ultrafine WC powder

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

Ultrafine/nano WC-Co Cemented Carbide: Overview of Preparation and Key Technologies

Ultrasmall and phase-pure W 2 C nanoparticles for efficient electrocatalytic and photoelectrochemical hydrogen evolution.

Preparation of Ultra-Fine WC-Co Cermet and Its Wear Behavior

Preparation of nano-scaled WC powder by low-temperature carbothermic reduction method

Research on Preparation Methods of Ultra-coarse WC Particles

A short and facile process to synthesize WC-Co cemented carbides

Preparation and characterization of W@WCx composite powder by oxidation-vacuum carbonization process

Study on influencing factors and mechanism of high-quality tungsten carbide nanopowders synthesized via carbothermal reduction

Rapid synthesis of ultrafine WC-Co cemented carbides by in-situ reactions and spark plasma sintering

Study on the preparation mechanism of novel WC-Cr2(C, N)-Co nanocomposites

Fabrication of tungsten oxide powder from WC–Co cemented carbide scraps by oxidation behaviour

Synthesis of WC-0.67wt.%Cr3C2 nanopowders by a one-step reduction-carbonization method and their characterization

Effect of Metal Elements on Microstructure and Mechanical Properties of Ultrafine Cemented Carbide Prepared by SPS

Synthesis of Nano Tungsten Carbide Via Loose Yellow Tungsten Oxide Rod Processing

Synthesis of Nanostructured Tungsten Carbide (WC) from Ammonia Paratungstate-APT and its Characterization by XRD and Rietveld Refinement

Effect of WC-Ni Powder Composition and Preparation on Cold Spray Performance

Preparation Technology of Ultrafine WC-CeCo Cemented Carbide

High hardness tungsten carbide base wear-resistant coating material and preparation method thereof

Synthesis and Formation Mechanism of W/TiC Composite Powders by a Wet Chemical Route