Abstract:Accurately control of the position of a fluid and particle within lab-on-a-chip platform is a critical prerequisite for many downstream analysis processes, such as detection, trapping and separation, moving the sensing at the single-particle level. With the development of microfluidic fabrication technology, particle/cell focusing has shifted from two to three dimensions. 3D hydrodynamic focusing, which sorts and aligns the incoming cloud of particles so that they pass through the interrogation area one by one, enables new possibilities and breakthroughs in the single-cell analysis system. Despite the excellent results shown in literature, there is still a lack of a device that can simultaneously fulfilling the requirements of high throughput, compactness, high integrability, and ease of use operation to become a widely accepted work center for biomedical research and clinical applications. Here, we proposed a unique 3D flow focusing microfluidic device buried in fused silica substrate that potentially combines all this advantages. By designing a sample channel suspended inside a larger buffer channel, manufactured by exploiting the laser-assisted micromachine technique, a not size-dependent focusing capability is shown. A spatially and temporally stable central flow of a mixture of 15 μm and 6 μm PS particles to a 1 μm PS microsphere solution has been obtained with high accuracy. Finally, to test the achievable focusing resolution, the chip was tested for the detection of Escherichia Coli bacteria in water solution as proof of concept of biological application.

Fabrication of Microfluidic Focusing Chip for Bioinstrumentation

Study on Microfluidic Inertia Focusing of Rigid Microspheres

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

The microfluidic chip fabricated by Hot Embossing Lithography for single- microsphere test

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Study on the Preparation and Test of Hydrodynamic Focusing Microfluidic Chip Fabricated by Liquid Crystal Display Mask Photo-Curing Method

Simplified 3D hydrodynamic flow focusing for lab-on-chip single particle study

Fabrication of optical fiber integrated micro-fluidic chips system by MEMS technology

Studies on the Method of Flow Cytometry Integrated with Microfluidic Chip

Fabrication Of Microfluidic Chip And Its Application

Fabricating Technologies of Nanofluidic Chips and Their Applications

Study on Microfluidic Chip for Controlling Shape of Focusing Flow by Single Pump

Observation Interface of PDMS Membrane in a Microfluidic Chip Based on One-Step Molding

Fabrication and Experimental Investigation of a Novel 3D Hydrodynamic Focusing Micro Cytometric Device

Design and fabrication of a microfluidic detection chip

Fabrication of PDMS Microfluidic Chip Used in Ultraviolet Integrated Biological Chip

Separation of Blood Plasma by Inertial Focusing Using Microfluidic Chips

Design, Fabrication and Detection of an Integration Micorfluidic Chip

Novel Fabrication Technology Of Polydimethylsiloxane Microfluidic Chip

Fabrication Of Microfluidic Chips By An Ultrasonic Micromachining With Wet-Etch Smoothing Method On Glass Substrates