Abstract:Microfluidic chips with the function of hydrodynamic focusing is widely used in the field of cell electroporation, droplet formation, drug screening and particle enrichment. Due to the small channel size of microfluidic chip, the existing processing methods have the defects of high fabrication cost or low dimensional consistency, the drawback is particularly prominent at small fabrication quantity. In this study, hydrodynamic focusing microfluidic chip was successfully fabricated by Liquid Crystal Display (LCD) mask photo-curing method with high efficiency and precision, the mechanism of curing parameters on the accuracy of microstructure was investigated, the hot pressing process was proposed to realize the bonding of cured photosensitive resin and glass substrate. By analyzing the focusing width of typical cross structure channel, a hydrodynamic focusing chip was designed. The effects of exposure time and single layer thickness on whole curing time was studied, the factors affecting the surface roughness were investigated, and the dimensional accuracy control method was proposed. The effect of bonding pressure on cured resin temperature was calculated and tested. The focusing width was verified by theoretical calculation and experiment. The mechanism for the inconsistency between the experimental focusing width and the theoretical focusing width was analyzed. The research proposed a solution of microfluidic design, fabrication, bonding and testing, which could provide a theoretical and methodological support for the efficient fabrication of microfluidic chips.

Design and fabrication of a microfluidic detection chip

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Non-swelling hydrogel-based microfluidic chips.

Fabrication of Fluidic Chips with 1-D Nanochannels on PMMA Substrates by Photoresist-Free UV-lithography and UV-assisted Low-Temperature Bonding

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Reasearch and fabrication of integrated pneumatic microvalves in polymer microfluidic chip

Non-invasive monitoring of biochemicals in hydrogel-assisted microfluidic chips

Microfluidic Device with Compound Structure

Electrochemical detection of droplet contents in polystyrene microfluidic chip with integrated micro film electrodes

A Simple Microfluidic Chip Design for Fundamental Bioseparation.

Fabrication of the PDMS-Glass Microfluidic Chip with Integrated Electrodes

Design and Testing of Micro Fluidic Chemical Analysis Chip Integrated with Micro Valveless Pump

Fabrication of optical fiber integrated micro-fluidic chips system by MEMS technology

Fabrication of a Three-Layer PDMS Pneumatic Microfluidic Chip for Micro Liquid Sample Operation

Study on the Preparation and Test of Hydrodynamic Focusing Microfluidic Chip Fabricated by Liquid Crystal Display Mask Photo-Curing Method

Microfluidic Preconcentration Chip with Self-Assembled Chemical Modified Surface for Trace Carbonyl Compounds Detection.

Fabrication of pneumatic micropump on glass-PDMS microfluidic chip and its application to chemiluminescence detection

Fabrication Techniques of Microfluidic Paper-Based Chips and Their Applications

10.1063/5.0083713.1

Preparation of microfluidic chips by electroplating and used for microdroplet study