Abstract:Vanadium oxynitride (VN x O y , x+y=1) is a metallic compound between vanadium oxides (VO, V 2 O 3 , V 2 O 5 ) and vanadium nitride (VN) which would have interesting properties and functions that potentially can be supplied for different applications. In this study, vanadium nitride and oxynitride thin films were obtained by reactive magnetron sputtering using vanadium targets, Ar as plasma carrier, and a mix of N 2 and O 2 as reactive gas. The ratio of mass flow between the two gases is maintained around O 2 :N 2 =1:20 during the process. To obtain crystalline phases of oxynitrides a post rapid thermal annealing (RTP) in Ar atmosphere at 600oC and 700oC for 5 minutes was done. The purpose of the study is to define the effect of the magnetron sputtering parameters, such as reactive gas flow rates, and annealing temperature on the composition, microstructure, and optical properties of the obtained vanadium oxynitride thin films. The characterization of obtained films includes the examination of thickness and morphology by the surface profiler and SEM; identifying crystal structures and further microstructural vibration modes of molecular polarizability by X-ray diffraction and Raman spectroscopy, respectively; evaluation of the chemical composition of films by XPS analysis; assessing of optical transmittance, reflectance, and absorbance by the UV-visible- NIR spectrometer. Experimental data reveal that the annealed films can be oxynitrides when the oxygen flow rate is below 0.25 sccm and the ratio of oxygen/nitrogen ≤1/20. The annealed vanadium oxynitride films in terms of their properties are closer to vanadium nitrides than to oxides: more metallic than semi-conductive with dark appurtenance and high optical absorbance across the spectrum between 200 and 900 nm. The optical absorbance reaches almost 90% around 300 nm and then slowly reduces to 70% at 900 nm. Thus, these films could be good optical shields. For practical usage, the deposition of O 2 :N 2 =1/20, O 2 <0.25 sccm, and 600oC annealing are recommended because of the truly low transmittance (<10%) through films.

Oxidation phase growth diagram of vanadium oxides film fabricated by rapid thermal annealing

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Surface Characterization of Thermally Oxidized Titanium Alloys

Influence of Annealing Temperature on Microstructure and Phase Transformations of Oxide System Bi2O3/TiO2 Formed in Aqueous Solutions

Thermal transition behaviors of vanadium pentoxide film during post-deposition annealing

Thermal oxidation-grown vanadium dioxide thin films on FTO (Fluorine-doped tin oxide) substrates

Wafer-size VO2 film prepared by water-vapor oxidant

Annealing-induced oxidation state transition, crystal formation, optical properties, and photocatalytic activity of vanadium oxide nanoparticles

Vanadium Dioxide Thin Films Synthesized Using Low Thermal Budget Atmospheric Oxidation

Effect of Vanadium Thickness and Deposition Temperature on VO2 Synthesis using Atmospheric Pressure Thermal Oxidation

Growth control of the oxidation state in vanadium oxide thin films

Phase evolution and thermochromism of vanadium oxide thin films grown at low substrate temperatures during magnetron sputtering

Tuning Phase Transition Temperature of VO2thin Films by Annealing Atmosphere

Epitaxial Growth and Metal-Insulator Transition of Vanadium Oxide Thin Films with Controllable Phases

Anodic Deposition of Vanadium Oxides for Thermal-Induced Growth of Vanadium Oxide Nanowires

(Digital Presentation) Fabrication and Characterization for Vanadium Oxynitride Thin Films By Magnetron Sputtering

Compositional and Structural Evolution of the Titanium Dioxide Formation by Thermal Oxidation

Synthesis of Vanadium Dioxide Thin Films on Conducting Oxides and Metal–insulator Transition Characteristics

Vanadium Oxide: Phase Diagrams, Structures, Synthesis, and Applications

Surface Oxidation State Variations and Insulator–Metal Transition Modulations in Vanadium Oxides with Pulsed Hydrogen Plasma

Phase identification of vanadium oxide thin films prepared by atomic layer deposition using X-ray absorption spectroscopy