Abstract:Nanocrystalline pure perovskite phase bismuth sodium titanate (Bi0.5Na0.5)TiO3(BNT) powders have been prepared by a sol-gel method from the poly vinyl alcohol evaporation route. bismuth nitrate [Bi(NO3)(3)], tetra-butyl titanate [Ti(OC4H9)(4)] and sodium acetate(CH3COONa) were used as raw materials and poly vinyl alcohol(PVA) as the sol-gel forming solvent. Stoichiometric amounts of the individual raw materials were thoroughly mixed in accordance with the BNT composition to form the stock solution. The pH of the stock was adjusted to 1-3 by adding acetate. Aqueous solution of PVA[10%(w/v)] was then added to the cationic mixture with thorough stirring. The weight ratio of the cationic mixture to the PVA aqueous solution was maintained at 2:1. The resulting viscous liquid was then heated over a hot crucible up to form a fluffy dry gel. The fluffy dry gels were calcined at different temperatures and times and then cooled to room temperature naturally. The X-ray powder diffraction(XRD) patterns of the heat-treated powders were obtained using a Bruker D8 Advance X-ray diffractometer with Cu K alpha radiation and nickel filter. Scanning electron microscope (SEM) studies of the NBT powders were performed using a JSM-6700F electron microscope. Phase-pure BNT powders were obtained at 550 degrees C for 2-2.5h which is relatively lower calcination temperature than other reports. The BNT powders consists of phase-pure perovskite nanocrystals with an average size of 100-200nm.

Study on BaBi4Ti4O15 nanoscaled powders prepared by sol–gel method

Preparation of BaBi4Ti4O15 powder by sol-gel process

Mechanism study of Sr1-xBaxBi4Ti4O15 ferroelectrics materials fabricated by sol-gel process

Synthesis and Microstructure of Barium Bismuth Titanate Thin Films Using a Sol-Gel Technique

PREPARATION OF NANOSIZED Bi3.25 La0.75 Ti3 O12 POWDER BY COPRECIPITATION METHOD

Synthesis and Characterization of Sr1−xBaxBi4Ti4O15 Ferroelectric Materials

PREPARATION AND SINTERING PROPERTIES OF BaTi4O9 BY CITRIC ACID GEL METHOD

Synthesis of Nanosized (1 − X )bisco 3 − X PbTiO 3 Ferroelectric Ceramic Powders

Synthesis of Nanocrystalline 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub> Powder by a Citrate Method

Preparation and Characterization of Nanocrystalline (1−x)bisco3–xpbtio3 Powder

The Effect of Ba 2+ Doping on the Structure of SrBi 4 Ti 4 O 15

Synthesis of Nanocrystalline 0.94Bi(0.5)na(0.5)tio(3)-0.06Batio(3) Powder by A Citrate Method

Sol-Gel Synthesis and Characterization of Nanocrystalline (bi0.5na0.5)tio3 Powders from the Poly Vinyl Alcohol Evaporation Route

Preparation of Ti Doped BaFe12O19 Ceramics by a Sol-Gel Process

Room-Temperature Synthesis of BaTiO<sub>3</sub>Nanoparticles in Large Batches

Structure and Electrical Properties of BaTiO3 Prepared by Sol–gel Process

Preparation of (NaBi)(1/2)TiO3 piezoelectric ceramic powder by sol-gel process

Sol‐Gel Routes to Nanostructured Patterned Ferroelectric Thin Films with Novel Electronic and Optical Functions

Study on Ba2+ Doping SrBi4Ti4O15 Ferroelectric Ceramics and their Dielectric Behaviors

Fabrication and Ferroelectric Properties of Ba-Doped Strontium Bismuth Titanate Ceramics

Shape-controlled hydrothermal synthesis of ferroelectric Bi 4Ti3O12 nanostructures