Abstract:The Ni0.3Cu0.2Zn0.5Fe2O4 nanofibers with diameters of around 100 nm were successfully fabricated by sol-gel method combined with electrospinning technology. The as-spun polymer/inorganic composite nanofibers and calcined products were characterized by means of thermogravimetric and differential thermal analysis (TG-DTA), X-ray powder diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The experimental results showed that the pure spinet structure was basically formed when the composite nanofibers were calcined at 450 degrees C for 2 h. With the increase of calcination temperature, the nanofiber surface became much rougher and the nanofiber morphology gradually changed toward the necklace-like structure along with the growth of Ni0.3Cu0.2Zn0.5Fe2O4 grains contained in the nanofibers. At the same time, the specific saturation magnetization (M-s) of nanofibers monotonously increased, while the coercivity (H-c) initially increased, reached a maximum value at about 650 degrees C, and then decreased with further increasing calcination temperature, indicating that the single-domain critical size of Ni0.3Cu0.2Zn0.5Fe2O4 in the form of nanofibers may be around 53 nm. Furthermore, the relationship between the coercivity of Ni0.3Cu0.2Zn0.5Fe2O4 nanofibers and the mean grain size (D) was analyzed in a D range below the single-domain critical size. It was found that H-c of these nanofibers varied as D-0.71, which was in good agreement with the predicted D-2/3 dependence of H-c on the basis of the random anisotropy model.

NiCuZn Ferrite Thin Films Grown by a Sol–gel Method and Rapid Thermal Annealing

Magnetic Properties of NiCuZn Ferrite Thin Films Prepared by the Sol-Gel Method

Synthesis of Nanocrystalline Ferrites Zn0.4ni0.6cr0.5laxfe1.5-Xo4 and Its Magnetic Properties

Preparation and Magnetic Properties of Zn–Cu–Cr–Sm Ferrite Via a Rheological Phase Reaction Method

NiCuZn Ferrite Thin Films for RF Integrated Inductors

Structure and properties of Zn-doped CoFe 2 O 4 thin films via a sol–gel method

NiZnCu Ferrite Prepared by Sol-Gel Process

Synthesis of Nickel-Zinc Ferrite Nanoparticles by the Sol-Gel Auto-Combustion Method: Study of Crystal Structural, Cation Distribution, and Magnetic Properties

Growth Temperature Dependent Evolutions of Microstructural, Optical and Magnetic Properties of Zn0.75Co0.25O Films

Growth, magnetic, and electronic properties of Ni-Zn ferrites thin films

High-temperature Solid State Synthesis and Characterization in Magnetic and Transporting Properties of Zn_xFe_(3-x)O_4 Powder

Microstructure and magnetic properties of Ni–Zn ferrite ceramics with different Ni2+ contents

Formation of Highly Textured Zn0.2Ni0.8Mn2O4 Thin Films by RF Magnetron Sputtering

The preparation and electromagnetic properties of nickel-zinc ferrite thin films

Structure, Morphology, and Magnetic Properties of High-Performance NiCuZn Ferrite

Molten salt synthesis of Ni 0.5Zn 0.5Fe 2O 4 ferrites

Co-Precipitation Synthesis of ZNCF Nanoparticle and their Structure, Morphological, and Magnetic Properties Characterization

Structure phase transition and magnetic properties of nanocrystalline

Effect of Calcination Temperature on Microstructure and Magnetic Properties of Ni0.3cu0.2zn0.5fe2o4 Nanofibers

Synthesis and investigation of structural, morphological, magnetic, dielectric and impedance spectroscopic characteristics of Ni-Zn ferrite nanoparticles

Annealing rate tuned magnetization level in polycrystalline ZnO:Cu films