Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

BaCO3 Modification of TiO2 Electrodes in Quasi-Solid-State Dye-Sensitized Solar Cells: Performance Improvement and Possible Mechanism

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Modification Of Tio2 Electrode With A Series Of Alkaline-Earth Carbonates: Performance Improvement Of Quasi-Solid-State Dye-Sensitized Solar Cells

Dye-sensitized Solar Cells Made from BaTiO3-coated TiO2 Nanoporous Electrodes

Ferroelectric BaTiO3 Dipole Induced Charge Transfer Enhancement in Dye-Sensitized Solar Cells

SrTiO3 Modified TiO2 Electrodes and Improved Dye-Sensitized TiO2 Solar Cells

Electronic-Insulating Coating of Caco3 on Tio2 Electrode in Dye-Sensitized Solar Cells: Improvement of Electron Lifetime and Efficiency

Study on Interfacial Characteristics of TiO2 Electrode Coated by Strontium Carbonate in Dye Sensitized Solar Cells

TiO2 surface modification and characterization with nanosized PbS in dye-sensitized solar cells.

Charge Recombination Reduction in Dye-Sensitized Solar Cells by Depositing Ultrapure Tio2 Nanoparticles on "inert" Batio3 Films

Alumina Post-Modification After Dye-Sensitization: Effect On The Performance Of Quasi-Solid State Solar Cells

High-Performance Tio2 Photoanode With An Efficient Electron Transport Network For Dye-Sensitized Solar Cells

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Solar-To-Electric Performance Enhancement by Titanium Oxide Nanoparticles Coated with Porous Yttrium Oxide for Dye-Sensitized Solar Cells

Modification of TiO2 with sodium borohydride and its influence on photovoltaic cell performance

Improved Efficiency of CdS/CdSe Quantum Dot Sensitized Solar Cells by Tetrabutyl Titanate Surface Modification

Double-layer Coating of SrCO3/TiO2 on Nanoporous TiO2 for Efficient Dye-Sensitized Solar Cells

Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn + Mg co-doped TiO2 electrode

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Dye-Sensitized Solar Cells with Modified Tio2 Surface Chemical States: the Role of Ti3+

Coadsorbent Modified TiO2 Electrode and Its Application in Dye-Sensitized Solar Cells